Sony BDV-N5200W - Additional Information - Speaker and Amplifier Specifications; Center Speakers; Subwoofers; Surround amplifier

78
GB
BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W
4-485-800-13(1)
D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200
(PMRF 02)\4485800131_GB (CEK)\100ADD.fm
masterpage: Left
Center (SS-CTB125) for BDV-N9200W/
BDV-N7200W
Center (SS-CTB126) for
BDV-N9200WL/BDV-N7200WL
Dimensions (w/h/d) (approx.)
365 mm × 73 mm × 77 mm
Mass (approx.)
1.1 kg
Center (SS-CTB127) for BDV-N5200W
Dimensions (w/h/d) (approx.)
240 mm × 90 mm × 85 mm
Mass (approx.)
0.58 kg (with speaker cord)
Subwoofer (SS-WSB126) for
BDV-N9200W/BDV-N7200W
Subwoofer (SS-WSB127) for
BDV-N9200WL/BDV-N7200WL
Dimensions (w/h/d) (approx.)
SS-WSB126:
265 mm × 430 mm × 265 mm
SS-WSB127:
265 mm × 425 mm × 265 mm
Mass (approx.)
SS-WSB126: 6.3 kg
SS-WSB127: 6.2 kg
Subwoofer (SS-WSB128) for
BDV-N5200W
Dimensions (w/h/d) (approx.)
225 mm × 365 mm × 345 mm
Mass (approx.)
5.8 kg (with speaker cord)
General
Main unit
Power requirements
Taiwan model:
120 V AC, 50/60 Hz
Other models:
220 V – 240 V AC, 50/60 Hz
Power consumption
On: 95 W (HBD-N9200W/
HBD-N7200W/HBD-N5200W)
105 W (HBD-N9200WL/
HBD-N7200WL)
Standby: 0.3 W (For details on the
setting, see page 51.)
Dimensions (w/h/d) (approx.)
480 mm × 78 mm × 212.5 mm incl.
projecting parts
Mass (approx.)
3.1 kg
Surround amplifier (TA-SA500WR) for
BDV-N9200W/BDV-N7200W
Surround amplifier (TA-SA600WR) for
BDV-N9200WL/BDV-N7200WL
Surround amplifier (TA-SA700WR) for
BDV-N5200W
Amplifier Section
TA-SA500WR/TA-SA600WR:
POWER OUTPUT (reference)
Surround L/Surround R:
200 W (per channel at 6 ohms, 1 kHz)
TA-SA700WR:
POWER OUTPUT (reference)
Surround L/Surround R:
100 W (per channel at 6 ohms, 1 kHz)
Rated impedance
6 
Communication system
Wireless sound Specification version
3.0
Frequency band
Europe, Oceania, Africa*, India, Middle
East*, Thailand, and Russia models:
5.2 GHz, 5.8 GHz
Singapore and Taiwan models:
5.8 GHz
China model: 5.2 GHz
* 5.2 GHz or 5.8 GHz may not be
available in some countries/regions.
Modulation method
DSSS
Power requirements
Taiwan model:
120 V AC, 50/60 Hz
Other models:
220 V – 240 V AC, 50/60 Hz
Power consumption
On: 55 W (TA-SA500WR)
70 W (TA-SA600WR)
45 W (TA-SA700WR)
Standby power consumption
0.5 W (standby mode)
0.3 W (turned off)
Dimensions (w/h/d) (approx.)
200 mm × 64 mm × 211.5 mm
Mass (approx.)
1.3 kg
Design and specifications are subject to
change without notice.