Sony BDV-T79 - Page 59

Additional Information
59
US
Surround amplifier (TA-SA300WR)
Amplifier Section
U.S.models:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC) With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 45 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250 milli
watts to rated output.
Other models:
POWER OUTPUT (reference)
Surround L/Surround R 125 W (per channel at 3
ohms, 1 kHz)
Rated impedance: 3 - 16 Ω
Power requirements 120 V AC, 60 Hz
Power consumption On: 50 W
Standby power consumption
0.5 W (standby mode)
0.2 W (turned off)
Dimensions (approx.) 206 mm × 60 mm × 236
mm (8
1
/8 in × 2
3
/8 in ×
9
3
/8 in) (w/h/d) with the
wireless receiver inserted
Mass (approx.) 1.3 kg (2 lb 14 oz)
Wireless transceiver (EZW-RT50)
Communication system Wireless sound
Specification version 1.0
Frequency band 5.736 GHz - 5.814 GHz
Modulation method DSSS
Power requirements DC 3.3 V, 300 mA
Dimensions (approx.) 30 mm × 9 mm × 60 mm
(1
3
/16 in ×
3
/8 in × 2
3
/8 in)
(w/h/d)
Mass (approx.) 10 g (
1
/2 oz)
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3W (Main Unit),
0.2W (Surround Amplifier).
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.