To Next PageTo Next PageWhat to do if the LED indicator is flashing red on my Sony TV?
If the LED indicator on your Sony TV is flashing red, try resetting the TV by disconnecting the AC power cord for two minutes, then turn it back on. If the issue persists, contact Sony Customer Support and provide them with the number of times the LED indicator flashes red.
General| Screen Size | 48 inches |
|---|---|
| Display Type | LED |
| Smart TV | Yes |
| HDMI Ports | 2 |
| USB Ports | 2 |
| Wi-Fi | Yes |
| Ethernet Port | Yes |
| Motionflow | Motionflow XR 240 |
| Bluetooth | No |
| Refresh Rate | 60 Hz |
| Sound Output | 10W + 10W |
| Resolution | 1920 x 1080 |
| Operating System | Linux |
Guides on initial setup and placement of the television.
Instructions for securing the TV to prevent toppling and ensure safety.
Details the functions and buttons of the remote control.
Solutions for common TV problems and error indicators.
Critical warnings about TV placement and electrical safety.
Crucial safety information on preventing the TV from toppling.
Provides specific methods to secure the TV to prevent falls.
Troubleshooting guide for internet connectivity failures.
Sets up parental controls to restrict content access.
Customizes parental lock rating options for US models.
Customizes parental lock rating options for Canadian models.
Configures settings for BRAVIA Sync compatible devices.
Details on connecting the TV's antenna and HDMI input.
Illustrates connecting a set-top box via HDMI for video input.
Illustrates connecting a set-top box using component video cables.
Guides on connecting cable systems or antennas for TV reception.
Demonstrates basic connection setup for BRAVIA Sync compatible devices.
Illustrates connecting a home theater system for enhanced audio.
Illustrates connecting a PC or older video equipment to the TV.
Guidelines for safe installation considering ventilation and space.
Troubleshooting steps for picture display problems.
Troubleshooting steps for network connectivity issues.
