Terminal Description
CAM (Conditional Access Module)
Provides access to pay TV services. For details, refer to the
instruction manual supplied with your CAM.
Note
Do not insert the smart card directly into the TV CAM slot. It
must be fitted into the Conditional Access Module provided
by your authorised dealer.
CAM is not supported in some countries/areas. Check with
your authorised dealer.
A CAM message may appear when you switch to a digital
programme after using the Internet video.
Do not remove the dummy card or cover (availability
depends on TV model) from the TV CAM slot other than to
insert a smart card fitted in CAM.
CENTER SPEAKER IN
To use your TV speakers as the centre speaker, connect the output
of your AV receiver to the CENTER SPEAKER IN on your TV.
To use your TV speakers as the centre speaker, press the
(Quick Settings) button on the remote control, and set [Speakers]
to [Audio system] from [Settings] — [Display & Sound] — [Audio
output].
Note
Before connecting cables, disconnect the AC power cord
(mains lead) of both the TV and AV receiver.
If you do not use the CENTER SPEAKER IN terminal or the
S-CENTER SPEAKER IN terminal, you will need to perform
the following steps to prevent noise from the speakers.
Press the (Quick Settings) button on the remote control,
and disable [TV centre speaker mode] in [Settings] —
[Display & Sound] — [Audio output].
To Next Page
Loading...
Need help?
General
