Need help?Do you have a question about the Sony BRC-300P and is the answer not in the manual?
General| Type | - |
|---|---|
| PTZ control | Yes |
| Connectivity technology | Wired |
| Product color | White |
| Total megapixels | 1.07 MP |
| Maximum resolution | - pixels |
| Analog signal format system | PAL |
| Pan range | -170 - 170 ° |
| White balance | Auto, Indoor, Manual, Outdoor |
| Tilt angle range | -30 - 90 ° |
| Minimum illumination | 7 lx |
| Sensor type | CCD |
| Optical sensor size | 1/4.7 \ |
| Digital zoom | 4 x |
| Optical zoom | 12 x |
| Focal length range | 3.6 - 43.2 mm |
| Built-in HDD | No |
| RS-422 ports | 1 |
| Power consumption (typical) | 21.6 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Cables included | AC |
Weight and Dimensions| Depth | 205 mm |
|---|---|
| Width | 180 mm |
| Height | 210.1 mm |
| Weight | 2500 g |
Guidelines for operating and storing the camera safely and correctly, including ventilation and maintenance.
Explanation of image artifacts like white flecks and vertical smear inherent to CCD sensors.
Highlights the camera's compact design, 3CCD system, pan/tilt/zoom functions, and high-resolution capabilities.
Lists the items included with the camera, such as the camera unit, remote commander, and power adapter.
Describes a system setup for operating the camera from a short distance using the supplied remote.
Details a system for comfortable pan/tilt/zoom operations using the RM-BR300 Remote Control Unit.
Identifies and describes the functions of the camera's front and rear components and controls.
Explains the buttons and functions of the supplied remote control unit for camera operation.
Details the buttons, controls, and DIP switches of the optional RM-BR300 Remote Control Unit.
Provides an introduction to navigating and understanding the camera's on-screen menus.
Explains how to operate the camera menus using either the supplied Remote Commander or RM-BR300.
Details settings for controlling the camera's exposure mode, gain, shutter speed, and iris.
Describes how to select and configure the camera's auto and manual focus modes.
Explains how to set and adjust the camera's white balance modes, including auto and manual.
Covers settings for controlling pan, tilt limits, and digital zoom magnification.
Details settings for picture effects, wide mode aspect ratio, and aperture compensation.
Configuration options for data mixing, IR reception, image flipping, and pan/tilt reverse.
Settings for selecting analog video output signals (RGB, composite, S-video) via interface cards.
Instructions for powering on the camera and controlling it with the supplied remote commander.
Guidance on performing pan, tilt, and zoom movements using the remote commander's controls.
How to focus on subjects automatically or manually and use backlight compensation.
Procedure for saving and recalling camera settings (position, zoom, focus, backlighting) into memory.
Steps to power on the camera and RM-BR300 unit and assign camera addresses.
How to control camera pan, tilt, and zoom using the joystick of the RM-BR300 unit.
Guides for focusing, one-push auto focus, and adjusting white balance and brightness.
Instructions for saving up to sixteen camera settings using the RM-BR300 unit's preset feature.
Procedures for attaching interface cards and installing the camera on a desk or in a high position.
Details on connecting the camera to power, remote controls, monitors, VTRs, switchers, and sync generators.
Provides a list of possible error messages and their meanings or remedies for the camera and multiplex unit.
A guide to diagnosing and resolving common problems encountered with the camera and its accessories.
A hierarchical overview of all camera menu items and their initial settings.
Lists the camera settings that can be stored in memory and their availability across preset positions.
Technical details of the camera and remote control unit, including electrical, physical, and performance characteristics.
Provides detailed dimensional drawings for the camera and the remote control unit.
Detailed pinout information for various camera and control unit connectors (RS-422, RS-232C, TALLY/CONTACT).
Illustrates the wiring connections for the VISCA RS-422 communication interface.
To Next Page
