Sony BRC-Z700 - User Manual

91 pages

Save Page as PDF

To Next Page

E:\_NOUHIN_Nagashima\-TAKADA\3-287-510-11(1)\3287510111BRCZ700WW\for PrintPDF

COVdata\01COV_4.5mm.fm

masterpage: Left

BRC-H700

3-287-510-11 (1)

Operating Instructions

3-287-510-11 (1)

HD 3CMOS Color

Video Camera

BRC-Z700

3287510110

Sony Corporation Printed in Japan

Printed on recycled paper.

Main Page

Default Chapter3
- Table of Contents3
Getting Started5
Precautions5
Phenomena Specific to CMOS Image Sensors5
Overview6
Features6
System Components7
- Supplied Components and Accessories7
- Optional Products8
System Configuration11
- Operating a BRC-Z700 Camera Using the Supplied Remote Commander11
- Operating a BRC-Z700 Camera Using the RM-BR300 Remote Control Unit11
- Operating Multiple BRC-Z700 Cameras Using the RM-BR300 Remote Control Unit12
- Operating a BRC-Z700 Camera from a Long Distance13
- Operating Multiple BRC-Z700 Cameras from a Long Distance14
- Using BRC-Z700 Cameras and VISCA-Controllable Cameras in the same System15
- Transmitting Audio Signals Using the BRU-H70016
- Using the BRBK-MF1 HD Optical Multiplex Card and the HFBK-TS1 HDV Interface Board to Input Audio and Video Signals Simultaneouly to the HDV Video Equipment17
Location and Function of Parts18
- Camera18
- Remote Commander (Supplied)20
- RM-BR300 Remote Control Unit (Not Supplied)21
- BRU-H700 HD Optical Multiplex Unit (Not Supplied)24
- BRBK-MF1 HD Optical Multiplex Card (Not Supplied) (Available with the BRC-Z700 Only)25
- BRBK-HSD1 HD/SD-SDI Output Card (Not Supplied) (Available with the BRC-Z700 Only)25
- HFBK-SD1 SD Interface Board (Not Supplied) (Available with the BRU-H700 Only)26
- HFBK-HD1 HD Interface Board (Not Supplied) (Available with the BRU-H700 Only)26
- HFBK-XG1 XGA Interface Board (Not Supplied) (Available with the BRU-H700 Only)26
- HFBK-TS1 HDV Interface Board (Not Supplied) (Available with the BRU-H700 Only)26
Adjusting and Setting with Menus28
About On-Screen Menus28
- Main Menu28
- Setting Menus29
Operation through Menus29
- Menu Operation Using the Supplied Remote Commander29
- Remote Commander29
- Menu Operation Using the RM-BR300 Remote Control Unit30
EXPOSURE Menu31
COLOR Menu32
PICTURE Menu33
FOCUS Menu34
PAN TILT ZOOM Menu35
SYSTEM Menu36
VIDEO out Menu37
STATUS Menu38
SD-SDI Menu39
DOWN CONVERTER Menu39
HD-SDI Menu40
PC-OUTPUT Menu41
HDV Menu41
Operation Using the Supplied Remote Commander42
Turning on the Power42
Pan/Tilt and Zoom Operation42
- Panning and Tilting42
- Zooming43
- Operating Multiple Cameras with the Remote Commander43
Adjusting the Camera44
- Focusing on a Subject44
- Shooting with Back Lighting44
Storing the Camera Settings in Memory - Presetting Feature45
Operation Using the RM-BR30046
Remote Control Unit46
Turning on the Power46
- Operating Multiple Cameras46
Pan/Tilt and Zoom Operation47
- Panning and Tilting47
- Zooming49
Adjusting the Camera49
- Focusing on a Subject49
- Shooting with Back Lighting50
- Adjusting the White Balance50
- Adjusting the Brightness50
Storing the Camera Settings in Memory - Presetting Feature51
- Storing Camera Settings51
- Setting the Speed of the Camera Moving to a Preset Position52
Installation and Connections53
Installation53
- Attaching an Interface Board53
- Installing the Camera53
- Installing the Camera in a High Position55
- Ceiling Bracket (A)55
- Ceiling Bracket (B)55
- Wire Rope56
Connections61
- Connecting to an AC Outlet61
- Connecting the RM-BR300 Remote Control Unit62
- Connector Plug62
- Connecting a Monitor, Etc. Equipped with the Analog Component (Ypbpr) Input Connector63
- Connecting a Device Equipped with VISCA RS-232C Connector63
- RM-BR300 Remote Control Unit63
- Connecting a Device Equipped with VISCA RS-422 Connector64
- Connecting a Video Monitor, VTR, Etc. Equipped with Composite Video or S Video Input Connector65
- Connecting a VTR Equipped with SDI Input Connector65
- Connecting a VTR Equipped with HD-SDI Input Connectors66
- Connecting the BRU-H700 HD Optical Multiplex Unit66
- BRBK-MF1 HD Optical Multiplex Card66
- Connecting a Video Switcher67
- Connecting a Sync Signal Generator68
Appendix70
List of Messages70
Troubleshooting71
Menu Configuration73
Presetting Items78
Specifications81
- Dimensions83
- Pin Assignments86
- Wiring Diagram of VISCA RS-422 Connection89
- Using the VISCA RS-422 Connector Plug90

Other manuals for Sony BRC-Z700

Service Manual148 pages

Quick Stark Guide2 pages

Need help?

Do you have a question about the Sony BRC-Z700 and is the answer not in the manual?

Sony BRC-Z700 Specifications

General

Camera Type	PTZ Camera
Zoom	12x Optical Zoom
Pan Range	±170°
Signal System	NTSC/PAL
Video Output	HDMI
Tilt Range	+90°/-30°
Network Protocol	IP
F Number	F1.6
Pan Angle/Speed	300°/sec
Tilt Angle/Speed	Angle: +90°/-30°
Control Interface	RS-232C, RS-422
Minimum Illumination	F1.6
Horizontal Resolution	1000 TV Lines