Do you have a question about the Sony SNC-RZ25N and is the answer not in the manual?
Maximum resolution | 768 x 494 pixels |
---|---|
Pan range | -170 - 170 ° |
Tilt angle range | -90 - 30 ° |
Minimum illumination | 0.7 lx |
Digital zoom | 216 x |
Optical zoom | 18 x |
Focal length range | 4.1 - 73.8 mm |
Signal-to-Noise Ratio (SNR) | 50 dB |
Power over Ethernet (PoE) | No |
Power consumption (typical) | 18 W |
I/O ports | - Sensor in x 2 - Alarm out x 2 |
Dimensions (WxDxH) | 140 x 200 x 148 mm |
Power requirements | DC 12 V |
Compatible operating systems | Windows 2000/ XP |
Storage temperature (T-T) | -20 - 60 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 20 - 95 % |
Weight | 1300 g |
---|
Safety warnings regarding fire, shock hazards, and proper installation procedures.
Safety precautions for operating, storing, and cleaning the camera.
Steps to assign an IP address to the camera using the setup program or ARP commands.
Defines roles and accessible functions for Administrator and User types.
Accessing and displaying the administrator's camera settings window.
Overview of accessing and navigating the administrator menu.
Step-by-step guide to accessing the administrator menu.
Configuring title bar, welcome text, serial number, and default URL.
Setting camera date, time, and time zone synchronization.
Video mode, streaming, image size, and audio settings.
Adjusting white balance, exposure, brightness, saturation, and sharpness.
Configuring IP address, subnet mask, DNS, and HTTP port.
Setting up wireless LAN connection, including SSID and antenna.
Setting user names, passwords, and viewer modes for access control.
Limiting camera access based on IP addresses and subnet masks.
Configuring SMTP server, authentication, and recipient details.
Configuring FTP server connection details like server name and user credentials.
Setting detection areas, sensitivity, and threshold levels for motion detection.