Need help?Do you have a question about the Sony BRC-X1000/H800 and is the answer not in the manual?
Provides key safety points and guidance on how to effectively use the operating instructions manual.
Details the integrated pan-tilt head, optical zoom, and clear image zoom capabilities.
Information on the 1.0-type CMOS sensor, high sensitivity, and supported video formats.
Describes 3G-SDI, HDMI output, PoE+, VISCA over IP, and external video sync functions.
Identifies and describes the lens, tally lamps, remote commander sensors, and nameplates on the camera front.
Details system select switches, AC adapter cord clamper, IR select, network reset, and camera setup switches.
Explains HDMI, MONITOR OUT, LINE OUT, VISCA RS-422, LAN, EXT SYNC, and power terminals.
Explanation of the buttons and operations of the supplied remote commander for camera control.
Diagrams illustrating operation with supplied remote, optional controller, and multiple cameras.
Instructions for installing the camera on a desk or attaching it to a tripod, including safety notes.
Detailed steps for securely mounting the camera on a ceiling or high spot, including safety measures.
Procedure for connecting the camera to an AC power outlet using the AC adapter.
Instructions for connecting the camera to a PoE+ power supply device via a LAN cable.
Connecting the camera to devices with HDMI or SDI input terminals for monitoring or recording.
Connecting cameras to remote controllers via VISCA over IP (LAN) or VISCA RS-422 terminals.
Connecting to switchers, and synchronizing the camera with an external reference signal.
How to access, navigate, and use the camera's on-screen menus with the remote commander.
Step-by-step instructions for accessing and navigating menus using the remote commander.
Configuring focus modes: AUTO and MANUAL focus adjustments.
Adjusting noise reduction, ND filters, and IR cut filters for optimal image quality.
Configuring video mode, color space, and phase adjustments for HDMI output.
Managing image flip, pan/tilt reverse, IR receive, tally mode, and preset mode.
Steps for recording custom pan, tilt, and zoom movements using the PTZ TRACE function.
Procedure for playing back previously recorded pan, tilt, and zoom operations.
Instructions for deleting recorded pan, tilt, and zoom operations from memory.
Turning the camera on, performing pan/tilt actions, and resetting the camera's position.
Using zoom buttons and setting directionality (STD/REV) for camera movement.
Guidance on selecting and operating multiple cameras using the remote commander's camera select buttons.
Procedures for automatic and manual focusing on subjects.
Enabling and disabling backlight compensation for challenging lighting conditions.
How to store camera position, zoom, focus, and backlight settings into presets and recall them.
Recording, playing back, and deleting custom pan, tilt, and zoom operations.
System requirements and browser setup for accessing the camera via a web browser.
Steps to access the camera's web interface, including login and password change procedures.
Connecting the camera with optional remote control panels (RCP) or master setup units (MSU).
Procedure for upgrading camera firmware via the web interface.
Interpreting camera error messages, lamp indicators, and troubleshooting common operational issues.
Details on video signals, lens, power consumption, operating temperatures, and mass.
Guidance on setting the SYSTEM SELECT switch for video output format.
Pin array, connection diagram, and notes for the VISCA RS-422 terminal.
To Next Page
General