Need help?Do you have a question about the Sony BRC-X1000 and is the answer not in the manual?
General| Sensor type | CMOS |
|---|---|
| Optical sensor size | 1 \ |
| Full HD | Yes |
| Total megapixels | 14.2 MP |
| Supported video modes | 720p, 1080i, 1080p, 2160p |
| Pan range | -170 - 170 ° |
| Pan speed | 60 °/sec |
| White balance | Auto, Indoor, Manual, Outdoor |
| Tilt angle range | -30 - 90 ° |
| Camera shutter speed | 1/10000s - 1/8 (59.94/29.97), 1/10000s - 1/6 (50/25) s |
| Minimum illumination | 1.7 lx |
| Type | IP security camera |
| Placement supported | Indoor |
| Light exposure modes | Auto, Manual, Shutter priority AE |
| Connectivity technology | Wired |
| Antenna gain level (max) | 33 dBi |
| Optical zoom | 12 x |
| Focal length range | 9.3 - 111.6 mm |
| Maximum aperture number | 4.5 |
| Interface | RS-422 |
| DC output current | 13.2 A |
| Power source type | PoE |
| Wi-Fi | No |
| Networking standards | IEEE 802.3at |
| Operating temperature (T-T) | 0 - 40 °C |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | Black |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Depth | 238 mm |
|---|---|
| Width | 198 mm |
| Height | 260 mm |
| Weight | 4300 g |
Lists and explains error messages and indicators displayed by the camera.
Guide to diagnosing and resolving common camera operational problems.
Detailed list of camera menu items and their configurable settings.
List of camera settings that can be stored in memory presets.
Technical specifications for the camera, including signal, lens, and power.
List of items included in the camera package.
Physical dimensions of the camera and ceiling bracket.
Configuration of the SYSTEM SELECT switch for video output formats.
Pin array and connection diagram for VISCA RS-422 communication.
Important points for the safe use of the camera.
Guidance on how to read and navigate the operating instructions manual.
Measures to prevent unauthorized access to camera settings over a network.
Overview of the camera's capabilities including pan/tilt, zoom, and sensor.
Features like SDI/HDMI output, PoE+, and VISCA protocol support.
Identification and function of parts on the camera's front.
Details of switches, connectors, and terminals on the camera's rear.
Description of buttons and their functions on the supplied remote commander.
Instructions for inserting batteries into the remote commander.
Diagrams for operating a single camera with supplied or separate remote controllers.
Diagram and explanation for connecting multiple cameras to one remote controller.
Steps for installing the camera on a desk, tripod, or at a high spot.
Connecting the camera to AC adapter or PoE+ power supply.
Connecting to switchers, recorders, monitors, and remote controllers.
Synchronizing the camera's video signal with an external reference signal.
Overview of configuring camera settings via on-screen menus.
Guide to accessing and operating camera menus using the remote commander.
Settings for adjusting exposure parameters like mode, shutter speed, and gain.
Adjustments for white balance, color, and matrix settings.
Settings for image enhancement features like crispness and detail.
Adjusting knee point, slope, and mode for image compression.
Adjusting gamma correction and visibility enhancement settings.
Selecting and adjusting focus modes: auto and manual.
Settings for noise reduction, flicker cancel, and optical filters.
Configuring pan, tilt, and zoom operation modes and curves.
Settings for HDMI output video mode, color space, and phase adjustments.
System settings like image flip, pan/tilt reverse, and IR receive.
Configuring tally lamps and network parameters like IP address.
Checks before operating the camera with the remote commander.
Procedure for powering on the camera and peripheral devices.
Detailed guide to panning, tilting, and zooming the camera remotely.
Instructions for operating multiple cameras using the IR SELECT and CAMERA SELECT buttons.
How to focus on subjects automatically or manually and use backlight compensation.
Saving and recalling camera positions, zoom, and focus settings.
Requirements for PC setup and accessing the camera via a web browser.
Procedures for upgrading firmware and changing the camera's password.
To Next Page
