Need help?Do you have a question about the Sony BRC-X400 and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ modes | Preset point |
| Placement supported | Indoor |
| Light exposure modes | Auto, Manual, Shutter priority AE |
| Connectivity technology | Wired |
| Infrared (IR) cut-off filter | Yes |
| Audio formats supported | AAC-LC |
| Bit rate control | Constant Bit Rate (CBR), Variable Bit Rate (VBR) |
| Total megapixels | 8.5 MP |
| Gain control type | Auto/Manual |
| Maximum resolution | 3840 x 2160 pixels |
| Supported video modes | 720p, 1080i, 1080p, 2160p |
| Video compression formats | H.264, H.265 |
| Supported graphics resolutions | 640 x 360, 720 x 480, 720 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160 |
| Number of cameras | 1 |
| Focus | Motorized/Manual |
| Focal length range | 4.4 - 88 mm |
| Maximum aperture number | 3.8 |
| Minimum aperture number | 2 |
| Closest focusing distance | 0.08 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| DC output voltage | 12 |
| Power source type | DC, PoE |
| Power consumption (max) | 25.5 W |
| Sensor type | Exmor |
| Optical sensor size | 1/2.5 \ |
| Pan range | -170 - 170 ° |
| Pan speed | 300 °/sec |
| White balance | Auto, Indoor, Manual, One push, Outdoor |
| Tilt angle range | -20 - 90 ° |
| Camera shutter speed | 1/1 - 1/10000 s |
| Minimum illumination | 1.6 lx |
| Form factor | Dome |
| Mounting type | Ceiling/wall |
| Product color | White |
| Wi-Fi | No |
| Networking standards | IEEE 802.3at |
| Supported network protocols | IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, DHCP, DNS, RTP/RTCP, RTSP, UPnP, VISCA |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Depth | 200.2 mm |
|---|---|
| Width | 158.4 mm |
| Height | 177.5 mm |
| Weight | 1800 g |
Controls for camera movement, focus, and navigating on-screen menus.
Guide to storing and recalling camera positions and settings using presets.
Overview of major menu sections like Exposure, Color, Detail, and Picture.
Guidance for resolving common camera operational problems and error messages.
Details on camera specifications, switch settings, and interface pinouts.
Important points for safe operation and handling of the camera.
Recommendations for preventing unauthorized access and securing camera settings.
Details on camera movement, audio capabilities, and video output options.
Information on interfaces, power, sync, tally, picture profiles, and NDI|HX.
Detailed steps and precautions for installing the camera on a ceiling.
Guide for connecting the camera to a PoE+ power supply device via LAN.
How to select and operate multiple cameras using the remote commander.
Procedures for focusing on subjects and adjusting for backlight conditions.
How to store, recall, and clear camera settings using the preset feature.
Guide to selecting exposure modes like Full Auto, Manual, Shutter, and Iris Priority.
How to adjust gain values for exposure control, including gain limits.
Settings for shutter speed and iris control based on signal format.
Adjustments for exposure compensation, gain limits, and speed settings.
Options for setting white balance modes, speed, and offset.
Features for color matrix, saturation, hue, and RGB adjustments.
Configuring detail mode and adjusting the level of contour correction.
Adjusting bandwidth, crispness, HV balance, BW balance, and limits.
Adjusting knee mode, slope, and point for image compression.
Selecting gamma curves (STD, PATTERN, MOVIE, CINE) for image correction.
Adjusting gamma patterns, offsets, black gamma, and black levels.
Settings for visibility enhancer to improve image contrast in challenging scenes.
Choosing between Optical, Clear Image Zoom, and Digital zoom modes.
Options for automatic or manual focus control.
Adjusting high resolution, noise reduction, and NR levels for image clarity.
Settings for flicker cancel, image stabilizer, and IR cut filter.
Configuring pan/tilt limits, ramp curve, slow mode, and preset recall speed.
Settings for preset recall, common speed, freeze preset, and preset mode.
Managing preset recall speed, freeze preset, and preset modes.
Settings for HDMI color space and phase adjustment.
Configuring image flip, IR receive, tally level, and tele convert modes.
Settings for network IP, subnet mask, gateway, and DNS servers.
Steps to enable HTTP/RTSP communication for web browser access.
Procedure for changing the default administrator password for security.
Configuring camera settings by an administrator using a web browser interface.
Understanding HTTP and RTSP authentication types for web browser access.
Overview of accessing and navigating the administrator menu for camera setup.
Step-by-step guide to setting up administrator menus and tabs.
Overview of major administrator menu sections like System, Video, Audio, Network, Security, PTZF, Streaming.
Configuring date, time, format, time zone, and NTP synchronization.
Settings related to image flip, IR receive, tally level, and tele convert.
Configuring video output formats for SDI/HDMI and color space.
Procedures for rebooting, factory reset, and managing settings.
Instructions for firmware updates and managing system logs for troubleshooting.
Configuring picture settings like high resolution, noise reduction, and NR levels.
Adjusting exposure mode, visibility enhancer, iris, and gain.
To Next Page
