Why does “E03-007 IP Address Setting Error” appear on my Sony CBK-WA100 Adapter?
This error appears because there are conflicts between the network addresses for the wireless LAN and IP address setting. To resolve this, either manually change the address or change the setting of the network router.
What to do if the STATUS indicator lights in orange, and the file cannot be uploaded using Sony CBK-WA100 Adapter?
If the STATUS indicator is orange and you can't upload the file, it might be due to a poor 3G/4G/LTE radio wave signal. Try changing your location and attempt the upload again.
What to do if the STATUS indicator flashes in orange, and the file uploading fails on my Sony CBK-WA100 Adapter?
If the STATUS indicator flashes orange and the file upload fails, the user name and password for the server may be incorrect. Ensure you input the correct user name and password.
Why is the Wi-Fi remote commander not appearing for my Sony CBK-WA100?
The Wi-Fi remote commander might not appear because the USB cable is not connected or the firmware version of the camcorder/recorder is not adapted for the wireless adapter. Check that the USB cable is connected and that the firmware version of the camcorder/recorder is adapted for the wireless adapter.
Why can't the terminal device access the Sony CBK-WA100 Adapter?
The terminal device may not be able to access the wireless adapter due to incorrect connection settings on the terminal device, such as the IP address setting. Also, the communication setting between the access point and client may be invalid. Please check the connection settings of the terminal device, such as the IP address setting, and refer to the operating instructions of the access point for details on the communication settings.
What to do if the Web menu does not appear for Sony Adapter?
If the Web menu is not appearing, check the IP address setting and ensure that the port number (:8080) is added to the IP address.
What to do if I cannot log in to the Sony CBK-WA100?
If you cannot log in, check the user name and password that you set.
What to do if the original file cannot be uploaded using Sony Adapter?
If the original file cannot be uploaded, check that the USB cable is connected and that the firmware version of the camcorder/recorder is adapted for the wireless adapter.
Why does the STATUS indicator flash in red, and the wireless LAN cannot be used on my Sony CBK-WA100 Adapter?
The connected wireless LAN module may not be compatible with the wireless adapter. For compatible wireless LAN modules, contact your Sony dealer or a Sony service representative.
Why does the STATUS indicator flash in red, and the modem cannot be recognized by my Sony CBK-WA100 Adapter?
The connected modem may not be compatible with the wireless adapter. For compatible modems, contact your Sony dealer or a Sony service representative.
Details the wireless adapter's capabilities and functions for connecting devices.
Enables remote control, proxy file creation, and file uploading via wireless networks.
Allows live video monitoring and streaming from camcorders over wireless networks.
Lists compatible camcorders, recorders, and required firmware versions.
Specifies required devices and compatible terminal devices for using the adapter.
Connects SDI signals and DC power to camcorder/recorder (CBK-WA100 only).
Configures camcorder to output Rec/Stop signals for the wireless adapter.
Enables the wireless LAN function on the camcorder/recorder for remote control.
Steps to connect a terminal device to the adapter acting as an access point.
Procedure for connecting to an access point using the WPS function.
Steps to connect the adapter to an existing access point as a client.
Steps to connect to an access point manually when WPS is not available.
Details connecting the adapter to the Internet using an optional modem.
Steps for connecting to the Internet using a 3G/4G/LTE access point.
Instructions for connecting to the Internet by tethering a smartphone/tablet.
Information on compatible SDHC memory cards and recommended Sony SD cards.
Recording proxy files by interlocking with camcorder's start/stop operations.
Recording proxy files via interlocking with recorder's playback operations.
Recording proxy files by interlocking with camcorder playback.
How to play, delete, or format files on the SD card via the 'SD Card' screen.
Instructions for registering a server for file uploads.
Process of selecting files from SD card or camcorder for uploading.
Specific steps to upload files from SD card or camcorder/recorder slots.
How to select files for uploading and initiate the transfer.
Initiates file transfer and checks status indicators during upload.
Steps to transmit live video from camcorder via Internet or local network.
Interface and controls for remote camcorder operation via smartphone.
Interface and controls for remote camcorder operation via tablet.
Describes the initial screen, device status display, and shortcut buttons.
Guidelines for proper storage, handling, and environmental conditions.
To Next Page
General
