Sony FWD Series - User Manual

2-178-453-02 (1)
Option Adaptor
for FWD series
BKM-FW10/FW11/FW12
© 2004 Sony Corporation Printed in Japan
Operating Instructions
Mode d’emploi
Bedienungsanleitung
Manual de instrucciones
Istruzioni per l’uso
取扱説明書
English
WARNING
Owner’s Record
The model and serial numbers are located on the rear.
Record the model and serial numbers in the spaces provided
below. Refer to these numbers whenever you call upon your Sony
dealer regarding this product.
Model No.
Serial No.
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
Do not open the cabinet.
Refer servicing to qualified personnel only.
For installation, consult your nearest Sony dealer.
For customers in the U.S.A.
If you have any questions about this product, you may call;
Sony Customer Information Services Center
1-800-222-7669 or
http://www.sony.com/
Declaration of Conformity
Trade Name : SONY
Model : BKM-FW10/FW11/FW12
Responsible Party : Sony Electronics Inc.
Address : 16450 W. Bernardo Dr,
San Diego, CA 92127 U.S.A.
Telephone Number : 858-942-2230
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any Interference received, including
interference that may cause undesired operation.
For BKM-FW11 Users
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Deutsch
VORSICHT
Um Feuergefahr und die Gefahr eines
elektrischen Schlags zu vermeiden, darf das
Gerät weder Regen noch Feuchtigkeit
ausgesetzt werden.
Öffnen Sie daher das Gehäuse nicht.
Überlassen Sie Wartungsarbeiten stets nur
qualifiziertem Fachpersonal.
Wenden Sie sich zur Installation bitte an Ihren Sony-Händler.
Diese Zusatzadapter sind für Flachbildschirme der Serie
FWD von Sony gedacht. Sie können jeden dieser Adapter im
Bildschirm installieren.
Erläuterungen zur Verwendung eines Zusatzadapters finden
Sie in der Bedienungsanleitung zum Bildschirm.
Einzelheiten zum Installieren erfahren Sie bei Ihrem autorisierten
Sony-Händler.
These Option Adaptors are for the FWD series Sony Flat
Panel Display. You can install any of these adaptors in your
display.
For details on how to operate the Option Adaptor, refer to the
Operating Instructions for the display.
For details on installation, contact your authorized Sony dealer.
Français
AVERTISSEMENT
Pour prévenir tout risque d’incendie ou
d’électrcution, garder cet appareil à l’abri de la
pluie et de l’humidité.
N’ouvrez pas le châssis.
Confiez-en l’entretien exclusivement à un
personnel qualifié.
Pour l’installation, consultez votre revendeur Sony.
Ces adaptateurs en option sont conçus pour les moniteurs à
écran plat de la gamme FWD de Sony. Vous pouvez installer
n’importe lequel de ces adaptateurs sur le moniteur.
Pour plus de détails sur l’utilisation de l’adaptateur en
option, reportez-vous au Mode d’emploi du moniteur.
Pour plus de détails sur l’installation, consultez votre revendeur
Sony agréé.
お買い上げいただきありがとうございます。
この取扱説明書をよくお読みのうえ、製品を安全にお使いください。
お読みになったあとは、いつでも見られるところに必ず保管してください。
安全のための注意事項を守らないと、感電やその他
の事故によりけがをしたり周辺の物品に損害を与え
たりすることがあります。
Downloaded from: https://www.usersmanualguide.com/

Summary

Option Adaptor for FWD series

Owners Record

Record model and serial numbers for future reference when contacting a Sony dealer.

Safety Precautions

Warnings against exposure to rain/moisture, opening the cabinet, and servicing by unqualified personnel.

Declaration of Conformity

FCC compliance statement for the device, subject to specific operating conditions.

BKM-FW11 User Information

FCC compliance details and measures to correct potential radio interference for BKM-FW11 users.

Product Overview and Installation

Product Description

Describes the option adaptors designed for Sony FWD series flat panel displays.

Installation and Operation Guidance

Instructs users to refer to display's manual for operation and contact dealer for installation details.

Safety Information (Japanese)

Meaning of Warning Symbols

Explains the meaning of warning symbols used in the manual and on the product.

Installation and Handling Precautions

Advises on safe installation by qualified personnel and general handling to avoid injury or damage.

Electrical Safety

Instructions on disconnecting power before connecting/disconnecting cables and cleaning.

Maintenance and Modification

Discourages opening the unit or making modifications, recommending service by authorized personnel.

Product Compatibility and Usage (Japanese)

Compatibility

States that the unit is an optional adaptor exclusively for Sony FWD series flat panel displays.

Usage Instructions

Instructs to attach the adaptor to the display and refer to the FWD series manual for operation.

Service and Consultation

Advises consulting the dealer or service center for installation and other inquiries.

Sony FWD Series Specifications

General

Input Voltage	100-240 V AC
Output Voltage	19.5 V DC
Connector Type	Barrel
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Output Current	4.7A
Power	90W
Cable Length	1.8m
Weight	300g