EasyManua.ls Logo

Sony CCD-TR440PK - Using the House Current

Sony CCD-TR440PK
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can choose any of the fonowing power sources for your camcorder, battery pack (P.7), the house
current, and 12/24 V car battery. Choose the appropriate power source depending on where you want to
use yOur camcorder.
Place Power source Accessory 1:obe used
Indoors House current AC power adaptor AC-V15(sopplied), AC-SI0
Outdoor Battery pack Battery pack NP-33 (supplied), NP-98/98D, NP-80/80D,
NP-68, NP-C65, NP-60D
In the car 12 V or 24 V car battery DC pack DCP-77
This mark indicates that this product is a genuine accessory for Sony video products.
When purchasing Sony video products, Sony recommends that you purchase
accessories with this "GENULNE VIDEO ACCESSORIES" mark.
Using the House Current
To use the supplied AC-V] 5 AC power adaptor.
(1) Connect the AC power cord to a wall outlet. Insert the top of the connecting plate of the AC power
adaptor into the top of to the battery mounting surface. Push the conneCting plate so that it attaches
firmly.
(2) Set the selector to \rI_ (DC OUT).
_: You can hear the beep sound to confirm your operation.
2
WARNING
AC power cordmust onlybe changed atqualifiedserviceshop.
PRECAUTIONS
The set is not disconnected from the AC power source (mains) as long as it is connected to the wall
outlet, even if the set itself has been turned off.
Notes on the POWER lamp
* The POWER lamp willremain litfor a while even ifthe unit isunplugged afteruse. This isnormal.
* Ifthe POWER lamp does not light,set the selectorto V'l" (DC OUT) and disconnect the AC power
cord. After about one minute, tryagain.
To remove the adaptor
The adaptor isremoved in the same way as the batterypack (p.10).
Using a Car Battery ..........
U_ the DCP-T'/DC pack (not supplied). Connect the cord of the DC pack to the cigarettelighter socket
of a car (12 V or 24 V). Connect the DC pack to the battery mounting surface of the camcorder.
To remove the DC pack
The DC pack is removed in the same way as the battery pack (p. 10).
Options for Charging the Battery Pack
AC-SI0 AC power adaptor.
You can charge a batterypack whether itisused up or not with thisadaptor becau_ ithas a discharging
function.
e_
o
20 21

Related product manuals