To Next PageTo Next PageWhy won't my Sony CCD-TRV98 Operating Instructions (primary manual) power on?
If the power doesn't turn on, ensure a charged battery pack is correctly installed. Refer to pages 11 and 12 for detailed instructions.
What to do if Sony CCD-TRV98 Operating Instructions (primary manual) Camcorder viewfinder image is not clear?
If the image on the viewfinder screen of your Sony Camcorder is not clear, check that FOCUS is set to AUTO.
How to fix Sony CCD-TRV98 Operating Instructions (primary manual) when START/STOP does not operate?
If the START/STOP button on your Sony Camcorder isn't working, it might be because the POWER switch is set to OFF (CHARGE) or PLAYER. Set it to CAMERA.
What to do if Sony CCD-TRV98 Operating Instructions (primary manual) Camcorder Remote Commander does not work?
If the Remote Commander for your Sony camcorder isn't working, check if COMMANDER is set to OFF in the menu settings. If so, set it to ON.
Why is there no sound on my Sony Camcorder?
If there is no sound or only a low sound is heard when playing back a tape on your Sony Camcorder, the volume may be turned to minimum. Turn up the volume.
How to turn on Sony CCD-TRV98 Operating Instructions (primary manual) if it does not turn on?
If the power doesn't turn on, make sure the AC power adapter is correctly connected to a wall outlet.
Why does the tape not move on my Sony CCD-TRV98 Operating Instructions (primary manual)?
If the tape does not move when a video control button is pressed on your Sony Camcorder, the POWER switch may be set to CAMERA or OFF (CHARGE). Set it to PLAYER.
How to fix Sony Camcorder image on the viewfinder screen if it is not clear?
If the image on the viewfinder screen of your Sony Camcorder is not clear, adjust the viewfinder lens.
Why is my Sony Camcorder Remote Commander not working?
If the Remote Commander for your Sony camcorder isn't working, the batteries might be dead. Insert new ones.
Why does the CHG lamp not light up on my Sony CCD-TRV98 Operating Instructions (primary manual)?
If, while charging the battery pack, the CHG lamp does not light up on your Sony Camcorder, ensure the AC power adapter is firmly connected.
General warnings about handling the camcorder, including fire and shock hazards.
Features for adjusting exposure, image impact, and natural appearance during recording.
Overview of initial setup steps including power, date/time, and cassette insertion.
Instructions for connecting the AC power adapter and battery pack.
Step-by-step guide to correctly insert a video cassette.
How to remove the lens cap, set power, and start/stop recording.
Procedure for inserting and removing the battery pack for portable use.
Instructions on how to charge the InfoLITHIUM battery pack using the AC adapter.
Guidance on powering the camcorder via AC adapter for extended use.
Procedure for setting the camcorder's internal clock and date.
Detailed steps for inserting a Hi8 video cassette into the compartment.
Common problems and their corrective actions for recording and playback modes.
How to read and understand the camcorder's self-diagnosis codes.
General