22
Note
When using the LCD screen except in the mirror mode, the viewfinder automatically
turns off.
When you use the LCD screen outdoors in direct sunlight
The LCD screen may be difficult to see. If this happens, we recommend that you use the
viewfinder.
Picture in the mirror mode
The picture on the LCD is a mirror-image. However, the picture will be normal when
recorded.
During recording in the mirror mode
DATE and TIME on your camcorder do not work.
Indicators in the mirror mode
•The STBY indicator appears as Xz and REC as z. Some of the other indicators appear
mirror-reversed and others are not displayed.
•The date appears mirror-reversed when the auto date function is working. However,
the date will be normal when recorded.
Adjusting the brightness of the LCD screen
Adjust the brightness of the LCD screen with LCD BRIGHT in in the menu settings.
Recording a picture
LCD screen backlight
You can adjust the brightness of the backlight. Select LCD B.L. in the menu settings
(p. 53).
Even if you adjust the LCD screen backlight
The recorded picture will not be affected.
LCD SET
LCD BRIGHT
[
MENU
]
:
END
MENU
To Next Page
Loading...
Need help?
General