30
To control the display of the screen indicators
Press DISPLAY on your camcorder or the Remote Commander (CCD-TRV49/TRV78/
TRV98 only) supplied with your camcorder.
The indicators appear on the LCD screen.
To make the indicators disappear, press DISPLAY again.
DISPLAY
Playing back a tape
[a] [b]
23°
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the
LCD screen facing out [a]. You can adjust the angle of the LCD panel by lifting the LCD
panel up by 23 degrees [b].
To Next Page
Loading...
Need help?
General