Need help?Do you have a question about the Sony CDP-302 and is the answer not in the manual?
Procedure to test AC leakage from exposed metal parts to earth ground.
Identifies and displays laser warning labels affixed to the unit.
Procedure for grounding and handling the optical pick-up block to prevent static damage.
Step-by-step troubleshooting flow chart for the BU-1 base unit.
Procedure for adjusting the RF PLL for signal lock.
Procedure to check CLV phase lock status.
General| Type | CD Player |
|---|---|
| Frequency Response | 2Hz - 20kHz |
| Dynamic Range | 96dB |
| Total Harmonic Distortion | 0.003% |
| Signal to Noise Ratio | 110dB |
| Dimensions | 430 x 125 x 340 mm |
| Weight | 8.5 kg |
| Digital converter | 16-bit linear |
| Output Level | 2V RMS |
| Disc format | Compact Disc (CD) |
| Line output | 2V RMS |
| Channels | 2 |
To Next Page
