Sony CDP-561 - Section 3: Disassembly Procedures; Loading Panel and Mechanism Block Removal

SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
3-1. LOADING PANEL
© Remove the loading panel in the
direction shown by the arrow.
Bottom chassis
@ Use a tapering driver
to turn the cam by in the
direction of the arrow.
:
@ Pull-out of disc table. a
3-2. MD (BU-5BD20) BLOCK
© Remove the yoke bracket.
@ Turn the cam to the direction
of arrow (Counter clock wise)
by tapering driver.
@ Remove the MD (BU-5BD20)
to the direction of arrow.