Sony CDP-707ESD - Managing Programmed Selections; Checking Programmed Selections; Clearing Programmed Selections; Displaying Program Details

Checking
the
Programmed
Selections
Clearing
the
Programmed
Selections
{possibfe only on the main unit)
Press CHECK.
Each time you press CHECK, the selections are displayed
in the order they are programmed. At the lest selection,
"END" is displayed.
You can cheok the programmed selections during play.
Selection numbers over 20 cannot be displayed in the
music calendar, but track numbers and program numbers:
‘ara displayed in the window.
Clearing the whole program
Press §§ once during stop, or twice during play.
All the selections are cleared.
Clearing the last selections in the program
(operated only on the main unit}
Press CLEAR during stop.
‘The last selection is cleared each time CLEAR fs pressed.
Clearing a specific selection
(possible only on the main unit}
1 Press CHECK repeatedly until the selection to be
cleared Is displayed.
2 Press CLEAR while the selection number is displayed.
‘The selection is cleared from the programm.
‘You cannot clear the selection currently being played.
‘To display the remaining number of selections and time of the
program
Press DISPLAY twice.
It pause is programmed, the remaining number of selections and
‘time to the next programmed pause is displayed.
‘To retum to the normal display, press DISPLAY tuice, or three
times (i a disc memo is memorized).
+ Seapage zt.
‘To display the next selection number and the succoeding
selection number in the program
Press DISPLAY three times, :
‘To retum te the normal display, press DISPLAY once, oF twice {If
adise memo is memorized).
17