To Next PageTo Next Page
Need help?Do you have a question about the Sony CDP-791 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Disc format | CD |
| CD Mechanism | KSS-240A |
| Frequency Response | 2Hz to 20kHz |
| Signal-to-Noise Ratio | 115dB |
| Total Harmonic Distortion | 0.0025% |
| Line output | 2V |
| Digital outputs | coaxial |
| Dimensions | 430 x 110 x 290 mm |
| Weight | 4.5 kg |
| Year | 1992 |
| Channels | 2 |
| Digital Output | Coaxial |
| Digital converter | 1-bit |
| Output | Line output |
| Output Voltage | 2V |
Details frequency response, signal-to-noise, dynamic range, distortion, and channel separation.
Covers output levels, impedance, power requirements, and dimensions for various sections.
Lists similar models, mechanism types, and included accessories like the remote.
Method for testing AC leakage current from exposed metal parts to earth ground.
Identifies critical components for safe operation and replacement guidelines.
Precautions for handling the optical pick-up block to prevent electrostatic breakdown.
Guidelines for safely checking the laser diode emission from a safe distance.
Identification and description of controls on the front panel of the device.
Step-by-step instructions for removing the base unit of the CD mechanism.
Procedures for checking RF signal level and S curve waveform for diagnostics.
Methods for checking E-F balance, RF PLL frequency, and focus/tracking gain.
Details on IC pin functions and an overview of the system's block diagram.
Visual representations of circuit board layouts and detailed schematic diagrams.
Block diagrams and pin assignments for key integrated circuits used in the device.
An illustrated breakdown of the main chassis components and their assembly.
A list of capacitors, connectors, diodes, ICs, jacks, resistors, and transistors for the BD board.
A list of screws, nuts, and other hardware used in the assembly of the unit.
Details on the remote commander, cords, manuals, and packaging materials.
