Sony CDP-707ESD - Program Bank Function; Memorizing a Program; Playing with Program Bank; Clearing the Program Bank

--«Program Bank: Function
After programming selecticr
12 order. The memorized program Is called “program bank”.
Keeping the Program in Memory
1 Program the selections 2s you want
(page 15).
2 Press FILE.
PRM FILE
Disappears approx. one second tater.
“The program is memorized for the program
bank.
‘Only one program bank can be made for a
TE ST a i
Playing the disc using the program. bank |
2 Press & and put the disc in the diso
Clearing the Program Bank
1 Pot the dise whose program bank is to be cleared in
the player.
2 Press m to clear the program.
3 Press FILE.
“PGM CLR’ is displayed, and the program bank is
cleared.
‘Whereis the program bank memorized?
“Tha program bank is memorized in the compact dise player's
memory, Therefore, ia disc for which you made a program bank
is used with another compact dise player, play using the program
bank is not possible.
What is this indication?
‘This Indication appears when the custom
index (next page) has already been made for
the disc. The program bank and thecustors
index cannot both he made for the same disc
at the same time, To make the program bank,
first clear the custom index.
TX FILER
‘To play. disc having a program bank in other modes
1 Set the player in the desited play made.
2. Put the disc in the disc compartment.
@ Press me.
liyou press # to close the compartment after setting the player
inthe contineous play mode or the single play mode, program
bank play mode will be entered.
‘To play the selections in another program without clearing the
program bark:
Program the selections as you want before putting the dise in the
dise compariment, or afer pisting the disc in the player and
‘pressing Ip. The disc will be played in the newly programmed
‘order. You can program even during the pragram bank play.
23