Do you have a question about the Sony CDP-970 and is the answer not in the manual?
Type | CD Player |
---|---|
Digital converter | 1-bit |
Channels | 2 |
Frequency Response | 2 Hz - 20 kHz |
Signal-to-Noise Ratio | 110 dB |
Dynamic range | 100 dB |
Channel separation | 100 dB |
Total Harmonic Distortion | 0.003% |
Digital outputs | Coaxial, Optical |
Power Consumption | 15 W |
Disc format | CD |
Digital-to-Analog Converter | 1 Bit D/A Converter |
Output | Digital |
Line output | 2V |
Output Voltage | 2V |
Dimensions | 430 x 110 x 290 mm |
Methods for measuring AC leakage current from exposed metal parts to earth ground.
Precautions for handling the optical pick-up block, including electrostatic discharge and flexible board care.
Guidelines for servicing the optical pick-up block, advising against disassembly and APC circuit adjustments.
Detailed electronic schematic diagrams for the entire unit, broken down by circuit board.
Illustrations of expected waveforms at various test points for troubleshooting and adjustment verification.
Exploded view of the optical pick-up block (BU-5E), showing its internal components and assembly.