Sony CDP-970 - Page 10

mi^mm
:
B
+line.
;
B
-line.
CZ3:
adjustment for repair.
Voltage and waveforms are
dc
with respect
to ground under
no signal conditions,
no mark:
stop mode
(
)
: adjustment
mode
Voltages
are taken
with a VOM. (Input
inpedance
lOMQ)
Voltage variations
may be noted
due to normal
production
torerances.
Waveforms are
taken
with a oscilloscope.
Voltage
variations
may
be noted due
to normal
produc-
tion tolerances.
Circled numbers refer
to waveforms.
Signal
path.
Note: The
components
identified
by mark
^
or dotted
line
with mark A are
critical for safety.
Replace only
with part
number specified.