Sony CDP-CX270 - Inserting CDs

Getting Started
Inserting CDs
You can insert up to 200 discs into this player.
POWER Front cover OPEN JOG
Playing position
Rotary table
Loading position
1 Press POWER to turn on the player.
2 Press OPEN.
3 Turn the JOG dial until you find the disc slot
where you want to insert a disc, while checking the
disc number (written beside every five slots and
also indicated in the display).
Disc number
Disc slot at the loading position
The disc number at the loading position appears in
the front panel display.* If you have labeled the
disc with disc title (see page 23), the disc title
appears instead of the disc number. As you turn
the JOG dial, the disc number or the disc title
changes.
Disc number
Disc number or disc title
If you have already inserted discs, the disc number at
the playing position appears. When you turn the JOG
dial, the displayed disc number changes to the one at
the loading position.
Insert a disc with the label side facing right.
Notes
* Make sure you have inserted the disc into each slot at
a right angle to the rotary table. If the disc is not put
in straight, it may damage the player or the disc.
¢ Make sure the rotary table comes to a complete stop
before inserting or removing discs.
With the label side
facing right