6
Setting the clock
The clock has a 12-hour digital indication.
Example: To set the clock to 10:08
1 Press (DSPL) during operation.
If the POWER SELECT function is set to
“ON,” go to step 2. If it is set to “OFF,” set
to “ON” (page 9).
2 Press (DSPL) for two seconds.
The hour indication flashes.
1 Set the hour.
2 Press (SOUND).
The minute indication flashes.
3 Set the minute.
3 Press (DSPL).
The clock starts.
Note
If the car has no accessory position on the ignition
key switch, the clock cannot be set unless the
power is turned on. Set the clock after you have
turned on the radio, or started CD playback.
Elapsed playing time
To go forward
To go backward
To go forward
To go backward
Label side up
CD Player
Listening to a CD
Insert a CD.
Playback starts automatically.
If a CD is already inserted, press (SOURCE)
repeatedly until “CD” appears to start
playback.
Note
To play back an 8 cm (3 in.) CD, use the optional
Sony compact disc single adapter (CSA-8).
To Press
Stop playback 6 or (OFF)
Eject the CD 6
Changing the display item
Each time you press (DSPL) during CD
playback, the item changes as follows:
z Elapsed playing time z Track number
MOTION DISPLAY* Z Clock Z
* All the above items are scrolled in the display
one by one in order.
SOURCE
SOURCE
To Next Page
Loading...
Need help?
General
