Sony CDX-656 - Gear (Lomini);(Load 1) Assy; Operation Check

CDX-656/656X
13
3-3. GEAR (LOMINI)/(LOAD 1) ASSY
3-4. OPERATION CHECK
1 Confirm that the slider moves in the direction of arrow C to move down
the chuck plate if the gear (LOAD 1) is rotated in the direction of arrow A
or the chuck plate moves up and the slider moves in the direction of
arrow D if the gear is rotated in the direction of arrow B .
gear (LOAD 2)
gear (LOMINI)
marking
Fig. A
chuck plate
2 Attach the gear (LOMINI) at the position
shown in Fig. A.
shaft (rotary prevention C)
1 Move the lever (LOCK 3A)
fully in the direction of arrow
B
to move the chuck plate up.
B
4
stop ring 1.5 (E type)
3 Attach the gear (LOAD 1) assy
with its facing inside.
slit
chuck plate
slider
gear (LOAD 1) assy
A
B
C
D