Sony CDX-G1200U - Additional Information; Updating the Firmware; Precautions; Notes on discs

CDX-G1200U/G1201U/G1202U/G1280UM
14
3-3. SUB PANEL ASSY
3-4. CD MECHANISM DECK (MG-101CF-188)
2 two claws
rib
rib
1 two screws
(PTT2.6 u 6)
3 sub panel assy
Note:
When installing the sub panel assy,
align two ribs and two holes.
hole
hole
2 two claws
flexible flat cable
(27 core) (FFC1)
3 connector
( CN1005 )
2 Lift up the CD mechanism
block in the direction of
the arrow.
6 bracket (CD)
1
screw
(PTT2.6 u 6)
Insert is straight to the interior.
connector
flexible flat cable
(27 core) (FFC1)
Connector is unlock.
connector
flexible flat cable
(27 core) (FFC1)
Insert is incline
connector
flexible flat cable
(27 core) (FFC1)
Insert is shallow
connector
slot
Note 3:
When installing the flexible flat cable (27 core) (FFC1),
insert straight to the connector and lock a connector completely.
No slanting after insertion.
Note 2:
When installing the
CD mechanism block,
align the rib and slot.
4 flexible flat cable
(27 core)
(FFC1)
( CN401 )
1 screw
(PTT2.6 u 6)
5 two screws
(PTT2.6
u 4)
slot
7 CD mechanism deck
(MG-101CF-188)
Note 2:
When installing the CD
mechanism block,
align the rib and slot.
OK NGNGNG
1 flexible flat cable
(27 core)
(FFC1)
( CN401 )
3
+RZWRLQVWDOOWKH&'PHFKDQLVPEORFN
4 Align the rib
and slot.
CD machanism block
4 Align the rib
and slot.
2 flexible flat cable
(27 core)
(FFC1)
(
CN1005 )
This side is
the terminal
side.
Note 1: The service manual of the mechanism deck, used in this mod-
el has been issued in a separate volume. Please refer to the
service manual of the MG-101 series for the mechanism deck
information.