Getting
Started
Playable
discs
on
this
unit
This unit can play CD-DA (also containing CD
TEXT)
and CD-RlCD-RW (MP3/WMA/AAC
fi
les (page
16».
Type
of
discs
Label
on
the
disc
CD-DA
(illo§~
(illo§~
DIGITAL AUDIO
DIGITAL AUDIO
W·ll.mID
IReWritablel
(illo§~
(illo~@
MP3
DIGITALAUDID
DIGITAL AUDIO
WMA
,
•.
i
.•
IReWritablel
AAC
(illo§~
[gJO§@
iiM·)I~!1IM
IReWritablel
Resetting
the
unit
Before operating the unit for the first time,
or
after replacing the car battery
or
changing the
connections, you must reset the unit.
• Detach the front panel (page 7) and press the
RESET button (page 8) with a pointed object,
such as a ball-point pen.
Note
Pressing the
RESET
button will erase the clock setting
and
some stored contents.
Canceling
the
DEMO
mode
You
can cancel the demonstration display which
appears during turning off.
1 Press and hold the select button.
The setup display appears.
2 Press the select button repeatedly
until "DEMO" appears.
3 Rotate the control dial to select
"DEMO-OFF."
4 Press and hold the select button.
The
setup is complete and the display returns
to normal reception/play mode.
6
Preparing
the
card
remote
commander
Remove the insulation film.
Tip
For how
to
replace the battery, see page
17.
Setting
the
clock
The clock uses a
l2-hour
digital indication.
1 Press and hold the select button.
The setup display appears.
2 Press the select button repeatedIy
until "CLOCK-ADJ" appears.
3 Press
(SEEK)
+.
The hour indication flashes.
4 Rotate the control dial to set the hour
and minute.
To
move the digital indication, press
(SEEK)
-/+.
5 After setting the minute, press the
select button.
The setup is complete and the clock starts.
To display the clock, press
(DSPL).
Press
(
DSPL)
again to return to the previous display.
To Next Page
Loading...
Need help?
General
