[IT]
~
(front panel release) button page 7
[12J
MODE button page
11
To
select the radio band (FM/AM).
!Nl
Receptor for the card remote
commander
!HI
RESET button (located behind the front
panel) page 6
~
ZAP button page
11
To
enter
ZAPPINTM
mode.
[1§]
BTM button page
11
To
start the BTM function (press and hold).
I1Zl
Number buttons
CDIUSB:
CD/CD:
ALBM
-/+
(during MP3IWMAI
AAC playback)
To
skip albums (press); skip albums
continuously (press and hold).
(]):
REP* page 12, 13
G):
SHUF page 12, 13
®:DM+
Improves digitally compressed sound,
such
as
MP3.
To
activate the DM+ function, set
"ON."
To
cancel, set "OFF."
®:
PAUSE
To
pause playback.
To
cancel, press
agam.
Radio:
To
receive stored stations (press); store
stations (press and hold).
~
DSPL (display)/SCRL (scroll) button
page
12,13
To
change display items (press); scroll the
display item (press and hold).
lIm
AUX input jack page 15
To
connect a portable audio device.
* This button has a tactile
dot.
Note
When ejecting/inserting a disc, keep
any
USB devices
disconnected
to
avoid damage to the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 6).
PI
..
(
.....
)/-. (
...
)buttons
To
control radio/CDIUSB, the same as
(SEEK)
-/+
on the unit.
Setup, sound setting, etc., can be operated by
..
-..
g) DSPL (display) button page 12, 13
To change display items.
~
VOL (volume)
+*/-
button
To
adjust volume.
PI]
ATT (attenuate) button
To
attenuate the sound.
To
cancel, press
again.
fJ)
SEL (select) button
The same as the select button on the unit.
~
t (+)/
..
(-)
buttons
To
control CDIUSB, the same as
CD/CD
(ALBM
-/+)
on the unit.
Setup, sound setting, etc., can be operated by
t
...
~
SCRL (scroll) button
To
scroll the display item.
PI
Number buttons
To
receive stored stations (press); store
stations (press and hold).
* This button has a tactile dot.
Note
If
the unit is turned
off
and
the display disappears, it
cannot be operated with the card remote commander
unless (
SOURCE)
on the unit is pressed,
or
a disc is
inserted
to
activate the unit first.
To Next Page
Loading...
Need help?
General
