4
Location of controls
Refer to the pages listed for details.
a Volume +/– button
b ATT (attenuate) button 17
c DSPL (display mode change) button
11, 14
d OPEN/EJECT shutter 11, 12
e Display window
f EQ3 button 18
g OFF (Stop/Power off) button*
1
10, 12,
18
h SEEK +/– button
Radio:
To tune in stations automatically/find a
station manually.
CD/VCD:
To skip tracks/fast-forward, reverse a track.
i (front panel release) button 10
j SOURCE (Power on/Radio/CD/AUX)
button
To select the source.
k MODE button
To change the operation.
l SEL (select) button
To select items.
m RESET button (located on the front side of
the unit, behind the front panel) 9
n Number buttons 17
Radio:
To store stations/receive stored stations.
CD/VCD:
(1): REP 15
(2): SHUF 15
(3): SLOW 13
(4): AUDIO 14
(5): OSD 19
(6): PAUSE 12, 13
o Frequency select switch (located on the
bottom of the unit)
See “Frequency select switch” in the
Installation/Connections manual.
p SENS/ALBUM – button 12, 16
q BTM/ALBUM + button 12, 15
r SCRL (scroll) button 14
s Receptor for the card remote
commander
*1 Warning when installing in a car without an
ACC (accessory) position on the ignition switch
After turning off the ignition, be sure to press and
hold (OFF) on the unit until the display disappears.
Otherwise, the display does not turn off and this causes
battery drain.
EQ3
ATT OFF
SOURCE MODE
SEL
SEEK
123456
SENS
SLOW
–
ALBUM
+
AUDIO OSD PAUSEREP SHUF
CDX-V3800
BTM SCRL
DSPL
To Next Page
Loading...
