Sony CFD-E90L - D-Out Assy; D-OUT Board

13
CFD-E90L
1 screw (2.6 × 8)
D-out assy
2 Tilt the board to the direction of the arrow A
and remove the boss of the D-out assy, then
remove the D-out board to the direction of the arrow
B .
boss
A
B
3-13. D-OUT ASSY
2 two screws
(2.6
× 10)
4 connector
(CN332)
5 D-out assy
3
1
connector
(CN311)
3-14. D-OUT BOARD