Using the display
Yo u can check information about the CD using the
display.
Checking the information of an audio CD
To check the total track number and playing
time of the CD
Press Ą Ȱ while the CD is stopped, and you can check
them in the display.
To tal track number
To ta l playing time
Checking the information of an MP3 disc
To check the total folder number and total le
number on the CD
Press Ą
Ȱ
while the CD is stopped, and you can check
them in the display.
To tal folder number
To tal le number
To check le information
Press DSPL/ENT
Ȼ
on the unit while playing an MP3
disc. e display changes as follows:
e current le number and playing time
Ô
e song title (
)
e artist name (
)
e album name (
)
Playing tracks/MP3 les repeatedly
(Repeat Play)
Yo u can play tracks/MP3 les repeatedly in normal,
Shu e or Program play modes.
1
Press Ą
Ȱ
.
“CD” appears in the display.
2
Proceed as follows.
To repeat Do this
A single
track/MP3
le
1 Press REPEAT
ȵ
until “ 1” appears.
2 Press
Ã
or
Ñ
ȯ
to select the track/
MP3 le that you want to repeat.
3 Press
ā
Ȱ
on the unit.
All tracks/
MP3 les
on the CD
1 Press REPEAT
ȵ
until “ ” appears.
2 Press
ā
Ȱ
on the unit.
A selected
folder
(MP3 disc
only)
1 Press MODE
ȶ
until “ ” appears,
and then press REPEAT
ȵ
until “ ”
appears.
2 Select the folder by pressing
+ or
–
Ȯ
.
3 Press
ā
Ȱ
on the unit.
Tracks/
MP3 les
in random
order
1 Select Shu e Play (see “Playing tracks/
MP3 les in random order”).
2 Press REPEAT
ȵ
until “SHUF” and
“
” appear.
3 Press
ā
Ȱ
on the unit.
Files in a
selected
folder in
random
order (MP3
disc only)
1 Start Folder Shu e Play (see “Playing
tracks/MP3 les in random order”).
2 Press REPEAT
ȵ
on the unit until “ ”,
“SHUF” and “
” appear.
3 Press
ā
Ȱ
on the unit.
Programed
tracks/MP3
les
1 Program tracks/MP3 les (see “Creating
your own program”).
2 Press REPEAT
ȵ
until “ ” and “PGM”
appear.
3 Press
ā
Ȱ
on the unit.
On the remote
Use
à
Ȱ
instead of
ā
Ȱ
.
To cancel Repeat Play
Press REPEAT
ȵ
until “ ” disappears from the display.
Other Operations
Playing tracks/MP3 les in random
order
(Shu e Play)
Yo u can play tracks/MP3 les in random order. When
playing an MP3 disc, you can also play MP3 les in a
selected folder in random order (Folder Shu e Play).
1
Press Ą
Ȱ
.
“CD” appears in the display.
2
Press MODE
ȶ
until “SHUF” appears in the display.
When you select Folder Shu e Play (MP3 disc only),
press MODE
ȶ
on the unit until “ ” and “SHUF”
appear in the display. en press
TUNE + or –
Ȯ
on the unit to select a folder you want.
3
Press ā
Ȱ
on the unit to start Shu e Play.
On the remote
Use
à
Ȱ
instead of
ā
Ȱ
.
To cancel Shu e Play
Stop playing rst. en press MODE
ȶ
until “SHUF”
disappears from the display.
Tips
ˎ
During Shu e Play, you cannot select the previous track/MP3 le by
pressing
Ã
ȯ
.
ˎ
e resume function does not work during Shu e Play.
Creating your own program
(Program
Play)
Yo u can arrange the playing order of up to 15 tracks/MP3
les on a CD.
1
Press Ą
Ȱ
.
“CD” appears in the display.
2
Press MODE
ȶ
until “PGM” ashes in the display.
3
Press
Ã
or
Ñ
ȯ
then press DSPL/ENT
Ȼ
on the
unit (ENTER
Ɂ
on the remote) for the tracks/MP3
les you want to program in the order you want.
For MP3 les, press
TUNE + or –
Ȯ
rst and then
press
Ã
or
Ñ
ȯ
and DSPL/ENT
Ȼ
(ENTER
Ɂ
on the remote).
Audio CD (Program Play)
Programed track number
Playing order
MP3 disc (Program Play)
Programed le number
Playing order
4
Press
ā
Ȱ
on the unit to start Program Play.
On the remote
Use
à
Ȱ
instead of
ā
Ȱ
.
To cancel Program Play
Stop playing rst. en press MODE
ȶ
until “PGM”
disappears from the display.
To delete the last track or le of the program
Press CLEAR
ȿ
on the remote while the unit is stopped.
To check the order of tracks/MP3 les before
play
Press DSPL/ENT
Ȼ
on the unit.
Every time you press the button, the track number and
the playing order appear.
To change the current program
Press Ą
Ȱ
once if the CD is stopped and twice if the
CD is playing. e current program will be erased.
en create a new program following the programing
procedure.
Tips
ˎ
If you try to program 16 tracks/MP3 les or more, “FULL” will
appear in the display.
ˎ
You can play the same program again, since the program is saved
until you open the CD compartment or turn o the power of the
unit.
ˎ
You can record your own program. A er you have created the
program, insert a blank tape and press Ć
Ȫ
on the unit to start
recording.
ˎ
e resume function does not work during Program Play.
Presetting radio stations
Yo u can store radio stations into the unit’s memory. You
can preset up to 30 radio stations, 20 for FM and 10 for
AM in any order.
1
Press RADIO/BAND
ˎ
AUTO PRESET
ȭ
on the unit to
select the band.
2
Hold down RADIO/BAND
ˎ
AUTO PRESET
ȭ
on the
unit for 2 seconds until “AUTO” ashes in the display.
3
Press DSPL/ENT
Ȼ
on the unit.
e stations are stored in memory from the lower
frequencies to the higher ones.
If a station cannot be preset automatically
Yo u need to preset a station with a weak signal manually.
1
Press RADIO/BAND
ˎ
AUTO PRESET
ȭ
on the unit to
select the band.
2
Tune in a station you want.
3
Hold down DSPL/ENT
Ȼ
on the unit for 2 seconds
until the preset number ashes in the display.
4
Press PRESET + or –
ȯ
on the unit until the preset
number you want for the station ashes in the
display.
5
Press DSPL/ENT
Ȼ
on the unit.
e new station replaces the old one.
On the remote
1
Press RADIO/BAND
ȭ
until the band you want
appears in the display.
2
Tune in a station you want.
3
Hold down ENTER
Ɂ
for 2 seconds until the preset
number ashes in the display.
4
Press PRESET + or –
ȯ
until the preset number you
want for the station ashes in the display.
5
Press ENTER
Ɂ
.
Tip
e preset radio stations remain in memory even if you unplug the
AC power cord or remove the batteries.
Playing preset radio stations
1
Press RADIO/BAND
ˎ
AUTO PRESET ȭ on the unit to
select the band.
2
Press PRESET + or –
ȯ
on the unit to tune in the
stored station.
On the remote
1
Press RADIO/BAND
ȭ
.
2
Press PRESET + or –
ȯ
to tune in the stored station.
Falling asleep to music
1
Play the music source you want.
2
Press SLEEP
Ⱥ
to display “SLEEP”.
3
Press SLEEP
Ⱥ
to select the minutes until the unit
goes o automatically.
Each time you press the button, the indication changes
as follows:
“A UTO*” “60MIN” “30MIN” “20MIN”
“10MIN” “OFF”.
* When you select “AUTO”, the CD or tape stops playing in 90
minutes at most and the unit goes o automatically. When you
are listening to the radio, the radio goes o in 90 minutes.
If 4 seconds have passed a er you pressed SLEEP
Ⱥ
,
the minutes in the display are entered.
When the preset time has passed, the unit goes o
automatically.
To cancel the sleep function
Press POWER
ȩ
to turn o the power.
Note
When you are playing a tape using this function:
If the tape length of one side is longer than the set time, the unit will
not go o until the tape reaches the end.
Connecting optional component
Yo u can enjoy the sound from an optional component
such as a portable digital music player through the
speakers of this unit.
Be sure to turn o the power of each component before
making any connections.
For details, refer to the instruction manual of the
component to be connected.
Built-in audio cable
with stereo-mini plug
audio connecting
cable (not supplied)
or
(e.g.,portable digital
music player)
To AUDIO IN jack
To the line output jack
1
Connect the built-in audio cable with stereo-mini
plug
ȴ
on the unit to the line output jack of the
portable digital music player or other components*.
2
Turn the unit and the connected component on.
3
Press AUDIO IN
ȶ
on the unit and start playing
sound on the connected component.
e sound from the connected component is output
from the speakers.
* To connect the unit to a TV or VCR, use an extension cable (not
supplied) with a stereo-mini jack on one end (for the built-in audio
cable) and two phono plugs on the other end.
Recording the sound from the connected
component
1
Insert a blank tape.
2
Press AUDIO IN
ȶ
on the unit to display “AUDIO IN”.
3
Press
Ć
Ȫ
on the unit.
Recording starts.
4
Play the optional component connected to the unit.
Tip
Should the built-in audio cable
ȴ
become damaged, you can use the
AUD IO IN jack
ȳ
to connect an optional component to the unit. Use
an audio connecting cable (not supplied) with a stereo mini plug on
one end (for the AUDIO IN jack
ȳ
). Make sure the plug on the other
end is suited to the jack on the optional component; for example, a
stereo-mini plug for a portable digital music player, or two phono
plugs for a TV or VCR.
Notes
ˎ
Do not pull forcibly on the built-in audio cable
ȴ
. Doing so may
cause the plug to rip o .
ˎ
Connect the built-in audio cable
ȴ
or audio connecting cable (not
supplied) securely to prevent any malfunction.
ˎ
It is not possible to listen to two components connected at the same
time through the built-in audio cable
ȴ
and the AUDIO IN jack
ȳ
(using an optional audio connecting cable). Connect one component
at a time.
D-LIGHT SYNC OUT jack
Use the D-LIGHT SYNC controller to connect to this
D-LIGHT SYNC OUT jack
ȫ
. You need to connect
the D-LIGHT SYNC controller to the lighting device*
(not supplied). e lighting device will react according
to control signals transmitted by the D-LIGHT SYNC
controller upon receiving music source from the system.
For details on the use of D-LIGHT SYNC controller
and lighting device, refer to the respective operating
instructions supplied with the respective device.
D-LIGHT SYNC controller cord of
D-LIGHT SYNC controller (DSL-1)
* Refer to the D-LIGHT SYNC controller operating instruction for the
recommended lighting device.
Note
e lighting e ect may be di erent depending on the connected
lighting device or the type of music being played back.
To Next Page
Loading...
