The CD Player16
GB
Creating your
own program
(Program Play)
You can arrange the playing
order of up to 20 tracks on a CD.
=,+
Tips
• You can play the same
program again, since
the program is saved
until you open the CD
compartment or switch
FUNCTION.
• You can record your
own program. After
you’ve created the
program, insert a blank
tape and press r to
start recording.
1 Set FUNCTION to CD.
2 Press PLAY MODE until “PGM” appears in the
display.
3 Press the = or + then press DISPLAY•
ENTER for the tracks you want to program in the
order you want.
4 Press ^ to start program play.
To cancel Program Play
Press PLAY MODE until “PGM” disappears from the
display.
To change the current program
Press p once if the CD is stopped and twice if the CD
is playing. The current program will be erased. Then
create a new program following the programing
procedure.
^
FUNCTION
Programed track
PLAY MODE
Playing order
DISPLAY
ENTER
To Next Page
Loading...
