Sony CFD-S700 User Manual

1
CD
Model Name Using Similar Mechanism CFD-S22/S32
Section
CD Mechanism Type KSM-213RDP
Optical Pick-up Name KSS-213R
TC
Model Name Using Similar Mechanism CFD-V5
Section
Tape Transport Mechanism Type MF-V5-117
SERVICE MANUAL
Canadian Model
E Model
CFD-S700
CD RADIO CASSETTE-CORDER
SPECIFICATIONS
– Continued on next page –
Ver 1.2 2003. 11
9-877-048-03
2003K16-1
© 2003.11
Sony Corporation
Personal Audio Company
Published by Sony Engineering Corporation
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance
of about 200 mm from the objective lens surface
on the optical pick-up block with 7 mm
aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm)
(CLV)
Number of channels
2
Frequency response
20 - 20 000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range (CND, MX, E92)
FM: 87.5 - 108 MHz
AM: 530 - 1710 kHz
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 120 s (sec.) with Sony cassette C-60
Frequency response
TYPE I (normal): 80 - 10 000 Hz
General
Speaker
Full range: 10 cm dia., 6 ohms, cone type (2)
Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones
Power output
4.5 W + 4.5 W (at 6 ohms, 10% harmonic
distortion)
Power requirements
For CD radio cassette-corder:
120 V AC, 60Hz (CND, MX, E92)
9 V DC, 6 size D (R20) batteries
For remote control:
3 V DC, 2 size AA (R6) batteries
Power consumption
AC 25 W
Battery life
For CD radio cassette-corder:
FM recording
Sony R20P: approx. 3.5 h
Sony alkaline LR20: approx. 10 h
Tape playback
Sony R20P: approx. 1.5 h
Sony alkaline LR20: approx. 5 h
CD playback
Sony R20P: approx. 1 h
Sony alkaline LR20: approx. 4 h
Dimensions
Approx. 420 × 159 × 284 mm (w/h/d)
(16
5
⁄
8
× 6
3
⁄
8
× 11
1
⁄
4
inches) (incl. projecting parts)
Mass
Approx. 4.3 kg (9 lb. 8 oz) (incl. batteries)
Supplied accessory
AC power cord (1)
Remote control (1)
Design and specifications are subject to change
without notice.
Frequency range (E15, SP)
FM: 87.5 - 108 MHz
AM: 531 - 1611 KHz
230 V AC, 50Hz (SP)
115 - 127V/220 - 240V AC, 50/60Hz (E15)
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

Sony CFD-S700 Specifications

General

Brand	Sony
Model	CFD-S700
Category	Cassette Player
Language	English

Summary

SPECIFICATIONS

CD Player Specifications

Technical details of the CD player section, including system, laser properties, and speed.

Radio Section Specifications

Technical details of the radio receiver section, including frequency ranges and antennas.

Cassette-corder Section Specifications

Details of the tape recording and playback features, such as winding time and frequency response.

General and Power Specifications

Overall unit specifications including speaker, power requirements, dimensions, and mass.

SERVICING NOTES

General Servicing Precautions

Key safety and handling notes for repairs, including soldering and component replacement.

Component Handling and Checks

Specific notes on chip components, optical pick-up, and laser diode emission checks.

Repair Procedures and Checks

Specific repair techniques like using jigs and checking laser diode focus search.

GENERAL

Location of Controls and Remote

Identifies the location of controls on the main unit and the remote control.

DISASSEMBLY

Cabinet and Wiring Disassembly

Steps to disassemble front/upper cabinets and manage internal wiring.

Board Assembly Disassembly

Disassembly of control, power, battery, and main boards.

Mechanism and CD Unit Disassembly

Removing tape mechanism, cassette holder, PRE board, and CD unit.

Optical Pick-up and Related Parts Disassembly

Disassembly of CD board, optical pick-up, and related components.

MECHANICAL ADJUSTMENTS

Mechanical Adjustment Precautions

General precautions to be followed before performing mechanical adjustments.

Torque and Tape Tension Measurement

Procedures for measuring torque and tape tension using specific meters.

Tape Speed Adjustment

Procedure for adjusting tape speed using a digital frequency counter.

ELECTRICAL ADJUSTMENTS

Tape Section Electrical Adjustments

Adjustments for tape playback output level using standard test tape.

Tuner Section IF and Frequency Adjustments

IF, frequency coverage, and tracking adjustments for the FM tuner.

Tuner Section AM Adjustments

IF, frequency coverage, and tracking adjustments for the AM tuner.

CD Section Focus Bias Check

Procedure to check focus bias on the CD section using an oscilloscope.

DIAGRAMS

IC Pin Descriptions and Circuit Board Locations

Pin details for IC802 and layout of all circuit boards.

Block Diagrams

Functional overview of CD, MAIN, and Power Supply sections.

Printed Wiring Boards and Schematics

Layouts and detailed schematics for CD, MAIN, Control, and Power Supply sections.

IC Block Diagrams

Detailed block diagrams for specific integrated circuits used in the unit.

EXPLODED VIEWS

Cabinet Exploded Views

Exploded views of front, rear, and upper cabinets.

Mechanism and Optical Pick-up Exploded Views

Exploded views of tape mechanism and optical pick-up assembly.

ELECTRICAL PARTS LIST

Capacitors, Resistors, and Connectors

List of capacitors, resistors, connectors, and related components.

ICs, Transistors, and Diodes

List of integrated circuits, transistors, and diodes.

Mechanical and Miscellaneous Parts

List of transformers, coils, switches, speakers, and accessories.

REVISION HISTORY