Sony CFD-S100 Service Manual

1
SERVICE MANUAL
CFD-S100/S200
CD RADIO CASSETTE-CORDER
Other Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20,000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
SPECIFICATIONS
Radio section
Frequency range
FM: 87.5 - 108 MHz
US, CND, E92, MX model:
AM: 530 - 1,710 kHz
TW model:
AM: 531 - 1,611 kHz
AUS, SP, AR model
AM: 531 - 1,611 kHz (9 kHz step)
530 - 1,610 kHz (10 kHz step)
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 120 sec. with Sony cassette C-60
Frequency response
TYPE I (normal): 80 - 10,000 Hz
Ver. 1.4 2006.02
9-873-981-05
2006B04-1
© 2006.02
AUDIO POWER SPECIFICATIONS (US model)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 3.2-ohm loads, both channels driven from
150 - 6,300 Hz; rated 1.8 W per channel-
minimum RMS power, with no more than 10%
total harmonic distortion in AC operation.
Sony Corporation
Personal Audio Division
Published by Sony Techno Create Corporation
US Model
Canadian Model
CFD-S200
E Model
CFD-S100/S200
Australian Model
CFD-S100
Photo: CFD-S200 (SILVER)
CD
Model Name Using Similar Mechanism CFD-S36
Section
CD Mechanism Type KSM-213RDP
Optical Pick-up Name KSS-213R
TC
Model Name Using Similar Mechanism CFD-S400/S500
Section
Tape Transport Mechanism Type MF-S200
– Continued on next page –

Sony CFD-S100 Specifications

General

Brand	Sony
Model	CFD-S100
Category	Cassette Player
Language	English

Summary

Servicing Notes

Chuck Plate Jig Usage

Tool for playing discs without a CD lid during repair.

Laser Diode Operation Check

Procedure to check laser diode emission and focus search.

Disassembly Procedures

Cabinet Assembly Disassembly

Steps for disassembling the top, front, and rear cabinet assemblies.

Main Board Removal

Procedure for removing the main circuit board.

Optical Pick-Up Removal

Procedure for removing the optical pick-up assembly.

Adjustment Procedures

Mechanical Adjustments

Procedures for mechanical adjustments like torque and tape tension.

Tape Section Electrical Adjustments

Adjustments for tape output level and speed.

Tuner Section Electrical Adjustments

Adjustments for FM and AM radio frequency and tracking.

CD Section Focus Bias Check

Verifying the focus bias of the CD player's optical system.

Diagrams and Schematics

IC Pin Descriptions and Board Locations

Pin details for ICs and physical locations of circuit boards.

CD Section Block Diagram

Block diagram illustrating the CD section's signal flow.

Main Section Schematic

Schematic diagram for the main processing and control sections.

Power Supply Schematic

Schematic diagram detailing the power supply circuit.