Sony CFM-D1JMK2 - Dial Pointer Setting

CFM-D1JMK2/D1MK2
7
2-6. DIAL POINTER SETTING
2 Tuning gear
A
3 Knob(Tuning) assy
1 Tuning capacitor gea
r
B
Tuning capacitor gear
1. Turn the Tuning Capacitor Gear all the way in
the direction of the arrow until it is positioned
at the detent
B ( ) position Fig-1.
2. Turn the Tuning Gear until its position
A ( )
fits into the detent
B ( ) of the Tuning
Capacitor Gear.
Tuning gear
4
5 Screw +BVTP3X1
0
5 Screw +BVTP3X10
Tuning chassis
C
Pointer rack
Tuning chassis
Pointer
rack
Scribe lines
Tuning chassis
Fig-1
Fig-2
Fig-3
3. Line up the Pointer Rack with the scribe line
as shown in Fig-2.
4. Install so that the Tuning Chassis intermeshes
with the Pointer Rack as shown in
C of Fig-3.
5. Fasten the Tuning Chassis to the cabinet (Rear)
with the screw.