Sony CMT-EX5 - Listening to and Recording with Connected Components

22
GB
Listening to audio from a
connected component
1 Connect the audio cord.
See “Hooking up optional components” on
page 21.
2 Press FUNCTION repeatedly until “PC”,
“MD” or “TAPE” appears.
Start playing the connected component.
To select the desired connected
component
1 Turn on the system.
2 Press FUNCTION repeatedly until “PC”,
“MD” or “TAPE” appears.
3 Press MENU/NO on the remote.
4 Press . or > on the remote
repeatedly to select the desired connected
component.
To listen to Select
Recording on a connected
component
Making a digital recording on
a digital component
1Connect the digital optical cable.
See “Hooking up optional components” on
page 21.
2Start recording.
Refer to the operating instructions provided
with connected component.
Making an analog recording
on a component
1Connect the audio cord.
See “Hooking up optional components” on
page 21.
2Start recording.
Refer to the operating instructions provided
with connected component.
The connected personal computer PC?
The connected MD deck
MD?
The connected tape deck
TAPE?
5 Press ENTER/YES on the remote.