6
GB
2 Attach the speakers.
Afterwards, push down on the speakers to
make sure they are securely fastened to the
main unit.
Getting Started
Hooking up the system
Perform the following procedure 1 to 9 to hook up your system using the supplied cords and
accessories.
1 Set the speaker cord into the speaker
cord groove at the bottom of the
speaker.
Otherwise, the speaker cord could be
damaged.
AM loop antenna
Left speaker
Right speaker
FM antenna
The rear cover
Desktop stand
Before attaching the system to the stand, draw the
wires under the horizontal bar of the stand.
Otherwise, the wires could be damaged.
To Next Page
Loading...
