Sony DAV-HDX576WF User Manual

Usingan S-AIRProduct
The unit is compatible with the S-AIR function
(page 111 ), which allows sound lransmission
belween S-AIR products.
About S-AIR products
There are two types of S=AIR product.
• S-AIR main unit (this unix): This is for
transmitting sound. You can use up to three
S-AIR main unit. (The number of usable
S-AIR main unit depends on the use
environment.
• S-AIR sub unit: This is for receiving sound.
- Surround amplifier: You can enjoy
surround speaker sound wirelessly.
- S-AIR receiver: You can enjoy system
sound in auother room.
2,
S-AIR sub unit
(S-AIR receiver)
S-AIR main unit
2, 2,
)
S-AIR sub unit
(surround amplifier)
For the surround amplifier
For the S-AIR receiver
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission. You can use multiple S-AIR main
unit by setting a dil]izrent 1D l\)r each
component.
To set the ID of the unit
1 Pressl/_ on the unit.
The system turns on.
2 Press FUNCTION +/- repeatedly until
"DVD" appears in the front panel
display.
3 Press O DISPLAY while the system is
in stop mode.
The Conlrol Menu display appears on Ihe
TV screen.
4 Press 'I"/4, to select _ [SETUP],
then press @.
The options for [SETUP] appear.
5 Press'1'14, to select [CUSTOM], then
press @.
The Setup Display appears.
6 Press'1'14"to select [AUDIO SETUP],
then press @.
The options lkw [AUDIO SETUP] appear.
7 Press 'I"/4, to select IS-AIR SETUP--+],
then press @.
8 Press 'I"14,to select [ID], then press @.
Press ,I,/4, to select the desired ID, then
press @.
You can select any ID (A, B, or C).
The confirmation display appears.
10Press @.
Set the S=AIR sub unit to the same ID.
O
O
"1"
O
m
m
x
3
e-
e_
<
83us

Sony DAV-HDX576WF Specifications

Audio

audio power output amplifier	1000W (RMS) / 512W(FTC)
center speaker power output	84W (FTC 0.7%THD), 143W (RMS)
front speaker power output	84W x 2 (FTC 0.7%THD), 143W x 2 (RMS 10%THD)
subwoofer speaker power output	160W (FTC 0.7%THD), 285W (RMS)
impedance	3 ohm
subwoofer impedance	1.5 ohm

Power

power requirements	120V AC, 60Hz
power consumption in standby	less than 0.3 W
power consumption	125W

Tuner

station presets	10 AM, 20 FM
tuner type	AM/FM
tuning FM range	87.5 MHz-108.0 MHz
tuning AM range	530-1710 kHz
impedance	75 ohm

Weight and Dimensions

dimensions	225x395x325mm
weight	6.1kg
cord length	3.5m x 1
front speaker dimensions	103x225x82mm
front speaker weight	1.5 lbs. (0.7 kg)
front speaker cord length	4.5m x 2
center speaker dimensions	265x93x71mm
center speaker weight	1.5 lbs. (0.7 kg)
center speaker cord length	3m x 1
surround speaker dimensions	103x164x82mm
surround speaker weight	1.3 lbs. (0.6 kg)
surround speaker cord length	5m x 2