12
GB
Getting Started
Before connecting the speakers, attach the speaker stand to the speaker.
(For the front and surround speakers)
Use the parts as follows:
• Front speakers (2)
• Surround speakers (2)
• Speaker cords (2, blue/gray)
• Posts (2)
• Bases (large 2, small 2)
• Screws (small, black) (4)
• Screws (small, with washer) (4)
• Screws (large, with washer) (6)
For details of how to connect the speaker cords to the SPEAKER jacks, see page 23.
Note
• Spread a cloth on the floor to avoid damaging the floor when you assemble the speakers.
Ti
• You can use the speaker without the speaker stand by installing it on the wall (page 19).
To assemble the front speakers
1 Thread the speaker cord through the top hole in the base (large).
Assembling the speakers
Speaker cord
Top of the base (large)
Speaker
,
To Next Page
Loading...
Need help?
General
