Sony DAV-LF1 - IR Receiver A)B); IR Receiver Stand B)

Getting Started
17
GB
IR receiver
Used when the IR receiver of the surround speaker (L) cannot receive infrared signals because of the
position. Connect to the DIR-R3 jack of the surround speaker (L). For details, see “Using the IR
receiver” (page 32).
When using the IR receiver stand, attach the stand so that both delta marks on the IR receiver and stand
are aligned.
Note
When you connect the IR receiver to the surround speaker (L), it takes priority over the IR receiver of the surround
speaker (L).
IR receiver
IR receiver stand
Delta marks
continued