Why is there no sound on my Sony Home Theater System?
If you're experiencing no sound or very low sound from your Sony Home Theater System, ensure the equipment connected with the audio cable is set to receive DVD signal output. Check that the audio cables are securely connected and that the connected equipment is powered on. If the issue persists, the audio connecting cable may be damaged and need replacement.
How to eliminate loud hum or noise from Sony DAV-SB200?
If you hear a loud hum or noise from your Sony Home Theater System, wipe the plugs and jacks with a cloth slightly moistened with alcohol. Clean the disc. Ensure the speakers and components are securely connected. Move the TV away from the audio components.
What to do if Sony Home Theater System DVD Receiver doesn't work, but the power is on?
If the power is on but the DVD Receiver of your Sony Home Theater System isn't working, make sure a disc is inserted. Check that the DVD or audio CD indicator in the DVD display is lit.
Why is there no picture on my Sony Home Theater System?
If your Sony Home Theater System shows no picture, ensure your TV is set to receive the DVD signal output. Select the correct video input mode on your TV. Also, check that the video cable is securely connected and that your TV is powered on.
How to fix a Sony Home Theater System remote that isn't working?
If the remote control for your Sony Home Theater System isn't working, make sure it's pointed at the remote sensor on the DVD Receiver and that you are within 20 ft (6 m). Remove any obstacles between the remote and the receiver. If it still fails, replace the batteries in the remote.
What to do if my Sony DAV-SB200 DVD Receiver doesn't start playback?
If your Sony Home Theater System's DVD Receiver won't start playback, first, ensure that a playable disc is correctly inserted with the playback side down and placed within the guide. Make sure no menu is on the TV screen by pressing the DVD SETUP button. Also, check if the Rating level is set and, if so, cancel the Rating function or change the rating level. Clean the disc if it is dirty.
Why can't I tune into radio stations on my Sony DAV-SB200 Home Theater System?
To resolve issues tuning into radio stations on your Sony Home Theater System, ensure the antenna is securely connected. Adjust the antennas or connect an external antenna if necessary. If tuning with automatic tuning, try tuning in the station manually. Note that if no stations have been preset or preset stations have been cleared, you should preset the stations.
Why can't I change the sound mode on my Sony DAV-SB200 Home Theater System?
The sound mode or Pro Logic II mode on your Sony Home Theater System cannot be changed while playing an MP3 disc. Insert a CD disc.
How to fix a dim front panel display on a Sony DAV-SB200?
If the front panel display on your Sony Home Theater System is too dim, press DIMMER on the remote control.
What to do if there is no picture from my Sony Home Theater System?
If you're not getting a picture on your TV from the Sony Home Theater System, first ensure that your TV is set to the correct video input mode to receive the DVD signal. Also, check that the video cable is securely connected to both the DVD receiver and the TV. Finally, verify that the TV is turned on.
General| Type | Home Theater System |
|---|---|
| Audio Output Power | 300 W |
| Number of Channels | 5.1 |
| DVD Player | Yes |
| USB Input | Yes |
| Bluetooth | No |
| Surround Sound Formats | Dolby Digital, DTS |
| Speaker Type | Satellite |
| Remote Control | Yes |
| Tuner | FM |
To Next Page
