226
* DCR-IP55E only.
SteadyShot function
•The SteadyShot function may not correct excessive camera-shake. Even if STEADYSHOT is set to ON.
•Attachment of a conversion lens (optional) may influence the SteadyShot function.
If you cancel the SteadyShot function
The SteadyShot off indicator appears. Your camcorder prevents excessive compensation for
camera-shake.
NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Icon/item
CAMERA SET
D ZOOM
16:9WIDE
STEADYSHOT
HOLOGRAM F
VCR SET
NTSC PB
VIDEOINPUT
Mode
z OFF
20×
120×
z OFF
ON
z ON
OFF
z AUTO
OFF
z ON PAL TV
NTSC 4.43
z VIDEO
S VIDEO
Meaning
To deactivate the digital zoom. Up to 10× zoom is
carried out.
To activate the digital zoom. More than 10× to 20×
zoom is performed digitally (p. 44).
To activate the digital zoom. More than 10× to 120×
zoom is performed digitally (p. 44).
Not to record a 16:9 wide picture (p. 71).
To record a 16:9 wide picture.
To compensate for camera-shake.
To cancel the SteadyShot function. Natural pictures
are produced when shooting a stationary subject
with a tripod.
The HOLOGRAM AF emits when focusing on
subjects is difficult in dark places (p. 150)
The HOLOGRAM AF does not emit.
To play back a tape recorded in the NTSC colour
system on a PAL system TV
To play back a tape recorder in the NTSC colour
system on a TV with the NTSC 4.43 mode
To use the video plug of the A/V connecting cable
when recording from a player.
To use the S video plug of the A/V connecting cable
when recording from a player.
POWER
switch
CAMERA
CAMERA
CAMERA
MEMORY/
NETWORK*
VCR
VCR
Changing the menu settings
To Next Page