C
Christine MezaAug 21, 2025
What to do if the battery pack is dead on my Sony DCR-TRV840 PIXELA ImageMixer 1.0?
- DDebra SmithAug 21, 2025
If the battery pack is dead or nearly dead, install a charged battery pack.
What to do if the battery pack is dead on my Sony DCR-TRV840 PIXELA ImageMixer 1.0?
If the battery pack is dead or nearly dead, install a charged battery pack.
What to do if my Sony DCR-TRV840 PIXELA ImageMixer 1.0 says battery pack is not installed?
If the battery pack is not installed, or is dead or nearly dead, install a charged battery pack.
Why does the START/STOP button not work on my Sony Camcorder?
If the START/STOP button does not operate, it may be because the POWER switch is not set to CAMERA. Set it to CAMERA.
What to do if AC power adapter is not connected to a wall outlet for Sony DCR-TRV840 PIXELA ImageMixer 1.0?
If the AC power adaptor is not connected to a wall outlet, connect the AC power adaptor to a wall outlet.
What to do if the tape has run out in my Sony DCR-TRV840 PIXELA ImageMixer 1.0?
If the tape has run out, rewind the cassette or insert a new one.
Why does the playback button not work on my Sony DCR-TRV840 PIXELA ImageMixer 1.0 Camcorder?
If the playback button does not work, set it to VCR.
How to clean dirty video heads on Sony DCR-TRV840 PIXELA ImageMixer 1.0 Camcorder?
Clean the heads using the Sony V8-25CLD cleaning cassette (optional).
What to do if the write-protect tab is set to expose the red mark on Sony DCR-TRV840 PIXELA ImageMixer 1.0?
If the write-protect tab is set to expose the red mark, use a new tape or slide the tab.
General| Optical Zoom | 20x |
|---|---|
| Media Format | Mini DV |
| Viewfinder | Color |
| Microphone | Stereo |
| IEEE 1394 Interface | Yes |
| Included Software | PIXELA ImageMixer 1.0 |
| Type | Camcorder |
| Image Sensor | 1/4-inch CCD |
| Video Resolution | 720 x 480 |
| LCD Screen Size | 2.5" |
| Effective Pixels | 800, 000 |
