DSC-H5_L2
HELP
HELP 07
Install the microphone tilted as
shown in the figure below.
HELP 08
When removing the lens ring, remove the screw and strap sheet metal (R) first.
Slide the cap lever in the direction of arrow
A
while taking care that the cap
lever is not caught on the notch of the lens ring.
Remove the lens ring by turning it in the direction of arrow
B
.
2
Strap sheet metal (R)
1
Tapping screw (M1.7x4)
Microphone cushion
Microphone cushion (B)
Microphone
Microphone holder
Microphone cushion
Microphone
cushion (B)
Microphone
Microphone
holder
3
Lens ring
Cap lever
Lens ring
Notch of the
lens ring
B
A
Cap lever
To Next Page
Loading...
