3. Press the shutter button.
The product starts the self-timer shooting after three seconds.
Hint
If you want to use another Drive Mode than the 3-second self-timer mode, first
set [Self-portrait/ -timer] to [Off], then tilt the monitor upward approx. 180
degrees.
[99] How to Use Using shooting functions Selecting the ISO sensitivity
ISO
Sensitivity to light is expressed by the ISO number (recommended exposure
index). The larger the number, the higher the sensitivity.
1. MENU → (Camera Settings) → [ISO] → desired setting.
Menu item details
Multi Frame NR:
Combines continuous shots to create an image with less noise. Select the desired
ISO number from [ISO AUTO] or ISO 200 – 25600.
ISO AUTO:
Sets the ISO sensitivity automatically.
ISO 80 – ISO 12800:
Sets the ISO sensitivity manually. Selecting a larger number increases the ISO
sensitivity.
To Next Page
Loading...
