Note
If the date and time setting is cancelled halfway, the setting screen for the date
and time appears every time you turn on the camera.
[18] How to Use Confirming the operation method Confirming the operation method
Using the control wheel
You can select setting items by turning or pressing the top/bottom/right/left side of
the control wheel. Your selection is determined when you press on the center
of the control wheel.
The DISP (Display Setting), (Exposure Comp./Photo Creativity), /
(Drive Mode), (Flash Mode) functions are assigned to the top/bottom/left/right
sides of the control wheel. You can assign selected functions to the left/right sides
of the control wheel or to the in the center.
During playback, you can display the next/previous image by pressing the right/left
side of the control wheel or by turning the control wheel.
[19] How to Use Confirming the operation method Confirming the operation method
Using the control ring
By turning the control ring (A), you can change the desired settings instantly for
To Next Page
Loading...
