59
Using the shooting functions
Shooting menu For details on the operation 1 page 38
• For details on the white balance, see page 11.
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you
select [Fluorescent Light 1], [Fluorescent Light 2] or [Fluorescent Light 3].
• When shooting with a flash in other than [Flash] mode, [White Balance] is set to [Auto].
• Some options are not available depending on the Scene Selection mode (page 43).
• When [Underwater] is selected in Scene Selection, you can use [Underwater White Balance] instead of
[White Balance].
Adjusts the color tone during (Underwater) mode (page 42).
• Depending on the color of the water, the Underwater White Balance may not work correctly even though
you select [Underwater 1] or [Underwater 2].
• When shooting with a flash in other than [Flash] mode, [Underwater White Balance] is set to [Auto].
n (Incandescent)
Adjusts for places under incandescent lamp, or under bright
lighting, such as in a photo studio.
(Flash)
Adjusts for the flash conditions.
• You cannot select this item when shooting movies.
Underwater White Balance: Adjusting color tones during
Underwater mode
(Auto)
The camera automatically adjusts color tones underwater so
they appear natural.
(Underwater 1)
Adjusts for underwater conditions where blue is strong.
(Underwater 2)
Adjusts for underwater conditions where green is strong.
(Flash)
Adjusts for use of flash underwater.
To Next Page
Loading...
Need help?
General
