Sony DSC-T300 Cyber-shot&reg User Manual

85
Customizing the settings
Settings For details on the operation 1 page 80
Enables you to perform calibration when the touch panel buttons do not react at the
appropriate points where you touch.
Using the paint pen, touch the × mark displayed on the screen.
To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that
point are not effected.
The × mark moves on the screen.
If you fail to touch the right spot, the calibration is not performed. Touch the × mark again.
Changes the function of some buttons to operate the camera when installed in the Housing
(waterproof case).
The buttons will work as follows when the setting is [On].
– Objects cannot be brought into focus by touching the screen.
– The screen display is always [Normal].
– Some functions are limited. (The icons are not displayed.)
• Refer also to the operating instructions supplied with the Housing.
Calibration
Housing
On ( )
Changes the function of the buttons.
Off
Does not change any functions.

Sony DSC-T300 Cyber-shot&reg Specifications

General

Image Sensor	1/2.3" Super HAD CCD
Effective Pixels	10.1 MP
Optical Zoom	5x
Lens	Carl Zeiss Vario-Tessar
ISO Sensitivity	Auto, 80, 100, 200, 400, 800, 1600, 3200
LCD Screen Size	3.5"
LCD Resolution	230, 400 dots
Image Stabilization	Optical SteadyShot
Video Resolution	640 x 480 (30 fps)
Battery Type	NP-BD1 Lithium-Ion
Storage Media	Memory Stick Duo
Dimensions	94 x 59.3 x 21.4 mm
Focal Length	5.8-29.0mm (35-175mm equivalent)