Sony DSC-T50 - Precaution on Replacing the SY-164 Board

1-3E
DSC-T50_L2
1-4. PRECAUTION ON REPLACING THE SY-164 BOARD
VIDEO OUT Default Data Check
If the SY-164 board is replaced, the broadcast system data setting (NTSC/PAL) might be changed.
Check the default data of VIDEO OUT if destination code is right. If not, rewrite to the right value.
VIDEO OUT Default Data
Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 89, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
INITIAL LANGUAGE Default Data Check
If the SY-164 board is replaced, initial language setting may be changed. Check the default data of INITIAL LANGUAGE if destination code
is right. If not, rewrite to the right value.
Initial language: Language displayed at the next starting if the setting of Setup menu was reset.
It is different from the language setting selectable with the menu.
INITIAL LANGUAGE Default Data
Page Address Data Language GP1 GP2 GP3 GP4
4F 84
00 English zzz
01 Japanese z
04 Spanish zz
06 Portugal z
08 Simplified Chinese z
0B Russian z
0D Korean z
Note: GP1 is fixed to Japanese.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 84, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click
[Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.
Address
00 01894F
Page
Data
NTSC PAL